RESTRICTED USE ONLY | Fargo Electronics, Inc. |
Functional Specifications
Printer Components: Buttons, Hoppers and Cover
This illustration shows the features found on the front of the Card Printer.
Term |
| Description |
|
| |
On/Cancel | The On/Cancel button turns the Printer ON and OFF. | |
button |
| • It also serves to cancel the current print job and reset the Printer |
|
| |
|
| for the next print job. |
|
| • If a card is left within the Printer after a print job is canceled, it will |
|
| automatically be ejected when the Printer is turned back ON. |
|
| |
The | ||
|
| • The Printer must have the |
|
| print. |
|
| • When flashing, the |
|
| error condition. |
|
|
|
Card | Input | The Card Input Hopper is where blank cards are loaded. |
Hopper |
|
|
|
|
|
Card | Output | The Card Output Hopper is where printed cards eject. An |
Hopper |
| Attachable Card Output Hopper is included with the Printer and |
|
| serves to catch cards once they have finished printing. |
|
| • To attach this hopper, simply open the Top Cover of the Printer |
|
| and slip it over the edge of the Printer’s baseplate. |
|
| • Once the Top Cover is closed, it will hold the hopper securely in |
|
| place. |
|
| |
Top Cover | The Top Cover tilts from | |
|
| access the inside of the Printer to load cards and Ribbon. (Note: |
|
| The Top Cover must be shut in order for the Printer to print.) |
|
|
|
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0) | 12 |
|