RESTRICTED USE ONLY | Fargo Electronics, Inc. |
Connecting the Printer to the Computer
The Card Printer is designed to be used with nearly any IBM-PC or compatible running Windows 3.1x, Windows 95/98 or Windows NT. For best performance, a Pentium™ class computer with 16 MB RAM or higher is recommended.
The Printer is equipped with an ECP-compatible, high-speed Centronics parallel port. (Note: This port is the means through which the Printer receives data from the computer.)
Connect the Printer to the computer with a shielded, bi-directional parallel cable and refer to the following steps:
1Connect the Centronics-type parallel side to the Printer. Snap the fastening clips into place.
2Connect the other side to the back of the PC at the PARALLEL connector. The Printer must have its on-line light illuminated to receive data. If the light is not ON, press the on-line button.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0) | 18 |
|
