RESTRICTED USE ONLYFargo Electronics, Inc.
Reviewing the Glossary of Terms (continued)
Term | Definition |
|
|
|
|
A card dimension standard of 2.0625" L X 3.3125" W |
| |
| W, |
|
|
|
|
A card dimension standard of 2.125" X 3.370" |
| |
| 0.005" L) or 53.975 X 85.598 mm. |
|
|
|
|
A card dimension standard of 2.375" X 3.625" |
| |
| 0.005" L) or 60.325 X 92.075 mm. |
|
|
|
|
A card dimension standard of 2.625" X 3.875" |
| |
| 0.005" L) or 66.675 X 98.425 mm. |
|
|
|
|
Cursor | The marker in the LCD Display Window that indicates the active |
|
| selection. |
|
|
|
|
Darkness | A reference to color saturation. |
|
|
|
|
A 9 pin, |
| |
| interfaces. |
|
|
|
|
DC Motor | A Motor that works on DC with continuous motion. |
|
|
|
|
DC (Direct Current) | Electronic flow that is unidirectional, flowing from the positive (+) |
|
| to negative |
|
|
|
|
Default | A setting or parameter that comes preset from the factory in |
|
| Driver or firmware. Performance parameters may be customized |
|
| in the Driver, but can be reset to the factory values usually |
|
| through the push of the default button. The default values for the |
|
| firmware are usually denoted on a label attached to the Printer. |
|
|
|
|
Defrag | Abbreviation for defragmenting. The process of reformatting data |
|
| on a hard drive so that it uses space more efficiently. |
|
|
|
|
DIP switches (Dual | A small array of mechanical switches installed on the board that |
|
can be configured to change Printer operations including |
| |
Switches) | providing a variety of |
|
|
|
|
| Continued on the next page | |
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0) | 157 |
|
