FARGO electronic C10, M10 service manual Supplies Required

RESTRICTED USE ONLY Fargo Electronics, Inc.

Supplies Required

For the maintenance procedures outlined in this section, you will need the following items:

•Isopropyl alcohol

•Acetone

•Standard clear adhesive tape or masking tape

•Soft, lint-free cloth

Or, to make these maintenance procedures more convenient, a Printer Cleaning Kit is available from the authorized reseller. This optional kit includes the following:

•Printhead Cleaning Pens pre-moistened with 99.99% isopropyl alcohol for cleaning the Printer’s Printhead.

•Cleaning Cards with an adhesive backing for automatically cleaning the Printer’s gray card Feed Rollers and cleaning Rollers.

•Cleaning Pads pre-moistened with 99.99% isopropyl alcohol for cleaning the Printer’s drive Roller and general inside area.

Step Procedure

1Unplug the Printer’s main power cord before performing any type of maintenance procedure unless otherwise indicated.

Also, never use a sharp tool or a metal object of any kind to clean the Printhead. You will damage the Printhead!

2Watches, rings, bracelets and other jewelry can damage the Printhead if accidentally bumped against it.

For best results, remove such items before touching any internal components of Printer.

3Internal components of the Printer, such as the Printhead, may be damaged if exposed to static electrical discharges generated by various means, such as walking on a carpeted floor.

To avoid potential damage, always wear an appropriate personal grounding device, such as a wrist strap (w/ integral resistor) connected to an ESD ground.

Or, at a minimum, make positive contact with the bare metal chassis of the Printer with the hand prior to touching any internal electrical components.

Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0) 143