FARGO electronic M10, C10 service manual 170

RESTRICTED USE ONLYFargo Electronics, Inc.

Reviewing the Glossary of Terms (continued)

Term	Definition
RS-232	An interface standard, established in 1969 by the Electronic
	Industries Association, regarding the connecting of computer
	peripherals.
Saturation	A measure of the degree of color, from gray, with the same
	brightness.
Self-test	A pre-determined print file used to confirm Printer operation
	typically sent from the Driver or stored in the Printer's memory.
Sensor	An electro-mechanical/electro-optical device used to indicate a
	change in state in the Printer such as when a card reaches a
	certain location.
Serial	The transfer of data, one bit at a time and in sequential order,
communications	using a single wire.
Serial interface	A sub D 9 pin input/output port on the Printer, used for serial
	communication with the PC for AS400 operating systems or for e
	card encoding.
SIMM (Single In-Line	An array of memory chips, attached to a printed circuit board that
Memory Module)	installs in a slot on the main board.
Simplex	Single-sided printing.
SmartGuard	An application from Fargo Electronics that allows users to prevent
	access to the Printer through the use of a personally encoded
	smart card.
SmartGuard™	SmartGuard is a Printer security option that uses a custom access
	card and a built-in reader to restrict Printer access. Only a valid
	access card can enable the Printer to print cards.
SmartShield™	This option allows the Printer to print custom, security images on
	the card that reflect under a black or UV light source.
Smart Card	Smart cards have an embedded computer circuit that contains
	either a memory chip or a microprocessor chip. There are several
	types of smart cards: Memory, Contact, Contactless, Hybrid
	(Twin), Combi (Dual Interface), Proximity and Vicinity.
	Continued on the next page

Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0) 170