RESTRICTED USE ONLY | Fargo Electronics, Inc. |
Installing the Printer Driver
Once the appropriate Printer Driver has been installed, you will need to set the Driver up with the proper print options. Although each of the included Printer Drivers displays the print options in a slightly different format, the basic options are the same.
For this reason, this section lists and describes each of the Printer driver options in alphabetical order, rather than displaying them in the order in which they appear within any one of the Printer Drivers.
To open the Printer Driver setup window, please refer to the following steps for the specific operating system:
Step | Procedure |
|
|
1 | Windows 95/98 |
| Click the Start button, point to Settings and select Printers. |
|
|
2 | Windows NT |
| Click on the Card Printer icon with the right mouse button and select Properties. |
|
|
3 | Click the Start button, point to Settings and select Printers. |
|
|
4 | Click on the Card Printer icon with the right mouse button and select Document |
| Defaults. |
|
|
5 | Click on the Advanced tab of the Document Settings window. (Note: Most |
| applications allow you to change these same Printer Driver options from their own |
| Print screens. |
| This means that you don’t have to go back to the main Printer setup window each |
| time you want to change a setting or option in the Printer Driver. |
| These applications will usually give you the same choices and options, but in a |
| slightly altered format. |
|
|
6 | To change or verify the appropriate Printer Driver options for the print job, please |
| refer to the following descriptions given in alphabetical order: |
|
|
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0) | 50 |
|
