Active Smart™ Cleaning Care – Special Features

Humidity Control System (Where Fitted)

Important Note: When cleaning the shelf above the vegetable bins, we recommend that you do not disassemble the Humidity Control System from the shelf.

In the event that the plastic lid and humidity slides become separated from the glass shelf, follow these instructions to reassemble.

1Turn shelf upside down

2To attach humidity slides onto shelf

front corners, fit bottom clips into shelf front trim. Next, slide sideways towards shelf until arm clips onto glass.

3To attach humidity control lid – with text facing you, align lid with front of shelf. Hold lid vertically and fit front end into retainer on shelf. Ensure lid fits into retainer as well as underneath humidity slides.

4At the sides of the shelf, adjust

humidity slide tabs so that the plastic lid is between the shelf and the tabs.

5If clips on back of shelf are present,

fasten lid with rear clips. Ensure that the cover is fully secure at front and back of shelf.

Retainer

Humidity Slides

19

Page 19
Image 19
Fisher & Paykel Refrigerator & Freezer manual Humidity Control System Where Fitted