Freecom Technologies DVD RW Recorder Chapter 1: Start Up

Freecom DVD RW Recorder

Chapter 1: Start Up

1.1 Hardware installation

1. Connect the interface cable to the Freecom DVD RW

Recorder.

2. Connect the cable of the power supply to the Freecom

DVD RW Recorder and the power supply itself to the

socket.

3. Connect the interface cable to the interface port of your

computer.

4. Switch on the Freecom DVD RW Recorde r.

Since USB 2.0 is backwards compatible with USB 1.1, the Freecom DVD RW

Recorder can be connected to all USB ports. When connected to a USB 1.1 port,

however, the performance (data transfer rate) of the Freecom DVD RW Recorder

will be much lower than when the drive is connected to a USB 2.0 port.