Hardware Installation
1. RFID sensor and LEDs
EN
1. RFID sensor
1
2. LED (green/red)
3. LED (blue)
1. RFID sensor
This is the position where the keycard needs to be held to unlock the drive.
2. LED (green/red) |
|
LED off: | keycard protection not configured |
LED red, flashing quickly: | waiting for initial recognition of the first |
| Keycard |
LED green, flashing quickly: | waiting for initial recognition of the second |
| Keycard |
LED red, flashing slowly (1 second gap): delay of error detection | |
LED red, bright: | hard drive locked, can not be accessed |
LED green, bright: | hard drive unlocked, ready for use (read data |
| from / write data to the hard drive) |
LED red, flashing quickly: | erasing data on the hard drive |
3. LED (blue) |
|
LED blue: | device on |
LED blue blinking: | data transfer |
9
