Freescale Semiconductor, Inc.
Freescale Semiconductor, Inc.
Designer Reference Manual — DRM045
Section 1. Introduction and Setup
1.1 Introduction
Motorola’s ASB520, MC68HC908QT2 Infrared Remote Control Reference PC Board and software are designed to demonstrate how a simple, limited function, dedicated remote control system could be designed. The objective is to keep the design simple so a user can pick portions of interest to his design and turn them into an application specific system. This system is specifically programmed to control an APEX model 1201 DVD player.
A few of the more noteworthy features of the reference PC board are listed as follows:
•
•Infrared LED and driver
•Visible LED to show activity
•Six user push buttons
•MON08 programming interface for
•Battery holder for
•Microcontroller current monitor jumper block
A photograph of the reference PC board appears in Figure
1.2 About this Manual
Key items can be found in the following locations in this manual:
•Setup instructions are found in 1.3 Setup Guide.
•Schematics are found in 4.2 Schematic.
•Pin assignments for MON08 connector J1 are shown in Table
•User interfaces are described in 2.3 LEDs.
•For those interested in the design aspects of the reference PC board’s circuitry, a description is provided in Section 5. Design Considerations.
•System testing, hardware and software, are described in detail in Section 6. System Testing.
Using the ASB520 MC68HC908QT2 Based Infrared Remote Control Reference PC Board | DRM045 | |
|
|
|
MOTOROLA | Introduction and Setup | 7 |
| For More Information On This Product, |
|
| Go to: www.freescale.com |
|