Demo Setup

Repeat the PC software setup procedures again.

3.Control menu contents are not correct

Make sure the COM port selection is correct.

Check the Port Settings again and make sure the configurations are correct.

4.User input does not be detected correctly

Make sure the HyperTerminal Window is being selected all the time.

When typing HEX PWM input values, use ONLY CAPITAL letter for the input of A–F.

Use the + or − keys from the main keyboard area instead of those near the NUM lock key pad.

LED Lighting Control using the MC9S08AW60, Rev. 1

34

Freescale Semiconductor

Page 34
Image 34
Freescale Semiconductor S08 manual Demo Setup