![Remote Control Operation](/images/new-backgrounds/33254/3325415x1.webp)
Remote Control Operation
1. | START / STOP | Turns the Breeze unit on or off. | ||||
| ▼/▲ Arrow | Press to raise or lower the temperature setting. Temperature | ||||
|
| setting range is between 61�F – 86�F. | ||||
2. | FAN/AUTO | Adjusts the fan speed or sets fan to ‘AUTO’ operation. | ||||
|
| Selectable speeds are LOW, MEDIUM, HIGH or AUTO. AUTO will | ||||
|
| automatically adjust the fan speed to maintain the proper set | ||||
|
| point. |
|
|
|
|
3. | MODE | Selects the Breeze operating mode. Select between COOLING , | ||||
|
| HEATING | , DRY , FAN | or AUTO . | ||
|
| COOLING |
| mode – the unit will operate as an air conditioner | ||
|
| to maintain the desired set point. | ||||
|
| HEATING |
| – the unit will operate as a heat pump to maintain | ||
|
| the desired set point. |
| |||
|
| DRY | – the unit will operate as an air conditioner on | |||
|
| low speed to reduce humidity levels while not affecting the air | ||||
|
| temperature as greatly. |
| |||
|
| FAN | – the unit will operate as a fan to circulate air only. | |||
|
| AUTO |
| – the unit will operate as an air conditioner or heat | ||
|
| pump to maintain the desired set point. | ||||
4. | SENSOR | Pressing this button prompts the unit to take a reading of the | ||||
|
| room conditions. |
| |||
5. | CLOCK | Press to set the CLOCK . (CLOCK icon will flash when ready | ||||
|
| to set). Use ▼/▲ to set proper time. | ||||
6. | TIMER ON | Press to set the time for the unit to come on. Optional setting, | ||||
|
| only operates when ‘ON’ icon is illuminated on remote. | ||||
7. | AIR SWEEP | Press to turn on the AUTO AIR SWEEP function or to set the | ||||
|
| desired angle of the airflow. (Airflow angle is reset each time | ||||
|
| power is turned off) |
| |||
8. | EXTEND | When on, |
| will be displayed. In Cooling and Dry mode this | ||
|
| will allow the unit fan to operate for 10 extra minutes after | ||||
|
| satisfying the temperature set point. | ||||
9. | TEMP | Press TEMP button to toggle between displaying the set point or | ||||
|
| room temp on the Breeze unit display. | ||||
10. | TIMER OFF | Press to set the time for the unit to turn off. Optional setting, only | ||||
|
| operates when ‘OFF’ icon is illuminated on remote. | ||||
11. TURBO | TURBO mode | operates the unit at maximum performance | ||||
|
| level to bring the room to the set point temperature as rapidly as | ||||
|
| possible. Available in Cooling and Heating mode. | ||||
12. SLEEP | Press to enter SLEEP mode | . SLEEP mode automatically | ||||
|
| adjusts the set point by 2 degrees after the first hour of operation | ||||
|
| to provide greater comfort overnight as well as save energy. | ||||
13. | LIGHT | Turns the LIGHT on the Breeze unit on or off. |
Special Features:
LOCK | You can lock the remote control by pressing the ▼ and ▲ simultaneously. |
| Press them again and the remote will unlock. |
Fahrenheit | The unit ships with the temperature readout in degrees Fahrenheit. |
/Celsius | To change to degrees Celsius press the MODE and ▼ buttons |
| simultaneously when the unit is off. Press them again and the remote |
| will return to Fahrenheit. |