Suggested Tool Requirements
SCREWDRIVER(+, -), RULER, KNIFE, HAMMER, PENCIL, LEVEL
PREPARATION OF CHASSIS
1.Remove the screws which fasten the cabinet at both sides and at the back. (Fig.1)
2.Slide the unit out from the cabinet by gripping the base pan handle and pulling forward while bracing the cabinet. (Fig.2)
3.Cut the window sash seal to the proper length. Peel off the backing and attach the
4.Insert the Frame guides into the bottom of the cabinet. (Fig.4)
5.Insert the Frame Curtain into the Upper Guide and Frame Guides.(Fig.4)
6.Fasten the curtains to the unit with 8 Type A screws. (Fig.4)
Shipping screws |
Fig. 1 |
Fig. 2 |
| Fig. 3 | |
Upper guide |
|
|
Screw |
|
|
(Type A) |
|
|
1 |
|
|
|
| Screw(Type A) |
Frame guide |
| 1 |
9 | Fig. 4 | |
12 |
|
|
