Manuals / Friedrich / Household Appliance / Air Conditioner

Friedrich CP06/CP08 manual Through-the-Wall Installation Instructions-Optional

Models: CP06/CP08

1 59
Download 59 pages 38.94 Kb
Page 17
Image 17

Through-the-Wall Installation Instructions-Optional

The case may be installed through-the-wall in both existing and new construction.

Read completely, then follow step-by-step.

NOTE: Obtain all materials locally for mounting the air conditioner through - the-wall.

1

D

IMPORTANT (cont.)

Secure with 14 wood screws anchored at Ieast an inch into the wall support structure.

NOTE: Drill pilot holes, if necessary, for proper installation. If the frame is oversized, use shims to prevent case distortion.

1IMPORTANT

Through-the-wall installation is not appropriate if any of the side or top louvers in the case will be obstructed by the wall.

All side and top louvers in the case must project on the outdoor side of the wall.

The room side of the case must project into the room far enough to maximize the balance of the unit.

The case must be installed level from side- to side and with a slight tilt from front to rear. Use a level; no more than a 1/2 bubble will be the correct case slant to the outside.

Lintel angle is required to support bricks or blocks above opening.

Flashing is required and should extend the length of the opening to ensure no inside cavity leakage occurs.

ARemove the air conditioner from the case. For specific instruction, refer to the Window Installation Instructions.

BMake certain that a wall receptacle is available close to the hole location or make arrangementsto install a receptacle.

2

A

FINISH THE WALL OPENING

Caulk all four sides on the outdoor side of the case to prevent moisture from getting through to the interior wall. Use of flashing (drip rail) will further prevent water from dripping inside the wall and down the outsida of the building.

C

Place the case in the wall opening and place wood support strips between the case bottom and the flashing on both sides of the bottom rail. They should be the same height as the bottom rail and the same length as the wall opening.

B

Place the air conditioner into the case.

For specific instruction, refer to the Window Installation Instructions.

16

Page 16 Page 18
Page 17
Image 17
Friedrich CP06/CP08 manual Through-the-Wall Installation Instructions-Optional
Page 16 Page 18

CP06/CP08 specifications

The Friedrich CP06 and CP08 models are pioneering climate control solutions designed to enhance indoor air quality and comfort. Combining state-of-the-art technology with user-friendly designs, these portable air conditioning units are ideal for both residential and commercial settings.

One of the standout features of the Friedrich CP units is their impressive cooling capacity. The CP06 model offers a cooling output of approximately 6,000 BTUs, effectively cooling spaces up to 250 square feet, while the CP08 steps it up to 8,000 BTUs, catering to rooms of up to 350 square feet. This versatility makes them suitable for various applications, from small bedrooms to larger living areas.

Energy efficiency is another hallmark of the Friedrich CP series. Both models are designed with a high Energy Efficiency Ratio (EER), minimizing electricity consumption while maximizing performance. This energy-saving capability is crucial for environmentally-conscious users looking to reduce their carbon footprint and lower energy bills.

Furthermore, the Friedrich CP06 and CP08 come equipped with advanced technologies that enhance user experience and comfort. For instance, the models feature a programmable timer and a remote control, allowing users to adjust settings from a distance. This convenience ensures that spaces are cooled to the desired temperature before arrival, combining comfort with efficiency.

In terms of design, the units boast a sleek and modern appearance that complements various interior styles. They are designed to be portable, with integrated handles and caster wheels, making it easy to move them from one room to another. Additionally, both models operate quietly, ensuring minimal disruption in home or office environments.

The Friedrich CP series emphasizes air quality, incorporating a washable, reusable filter that captures dust, pollen, and other airborne particles. This feature not only maintains cleaner air but also prolongs the lifespan of the unit.

In summary, the Friedrich CP06 and CP08 portable air conditioners deliver exceptional cooling performance, energy efficiency, and user-friendly features. With their advanced technology, silent operation, and emphasis on air quality, these models stand out as reliable solutions for maintaining comfort in any indoor setting. Whether for a home or business, the Friedrich CP series is an investment in both comfort and sustainability.