![](/images/new-backgrounds/1003226/322621x1.webp)
www.sylvane.com
2.2 AIR HANDLING PARTS
2.2.1 ORIFICE, AND TURBO FAN
1. Remove the front grille. (Refer to section 2.1.1)
2. Remove the cabinet. (Refer to section 2.1.2)
3. Remove the 2 screws which fasten the evaporator at the left side and the right side. (See Fig. 4)
4. Move the evaporator to the side carefully.
Figure 4
5. Remove the orifice. (See Fig. 5)
Figure 5
8. Using handheld pliers, remove the clamp which secures the turbo fan. (See Fig. 6)
Figure 6
9. Remove the turbo fan with pliers or your hand, without touching blades. (See Fig. 7)
10.
Figure 7
2.2.2 FAN
1. | Remove the cabinet. (Refer to section 2.1.2) |
|
2. | Remove the brace. |
|
| (Refer to section 2.2.1) |
|
3. | Remove the 7 screws which fasten the condenser. |
|
4. | Move the condenser to the side carefully. |
|
5. | Using handheld pliers, remove the clamp which |
|
| secures the fan. |
|
6. | Remove the fan. (See Fig. 8) |
|
7. |
| |
| removal procedures, above. | Figure 8 |