Friedrich US14C30, US12C30, US12C10 Refrigeration Cycle, Condenser, Evaporator, Capillary Tube

2.4 REFRIGERATION CYCLE

CAUTION

Discharge the refrigerant system using a FreonTM Recovery System.

Install a valve for the recovery, before venting the Freon, remove the valve when finished.

2.4.1 CONDENSER

1.	Remove the cabinet. (Refer to section 2.1.2)
2.	Remove the brace.
	(Refer to section 2.2.1)
3.	Remove the 7 screws which fasten the condenser.
4.	After discharging the refrigerant completely into a
	FreonTM Recovery System, unbraze the
	interconnecting tube at the condenser
	connections.
5.	Remove the condenser.
6.	Re-install the components by referring to the notes	Figure 15
	– on pages 11-13. (See Fig. 15)

2.4.2 EVAPORATOR

1.Remove the cabinet. (Refer to section 2.1.2)

2.Discharge the refrigerant completely – into a

FreonTM Recovery System.

3. Remove the 2 screws which fasten the evaporator at the left side and the right side.

4. Move the evaporator to the side carefully and then unbraze the interconnecting tube at the evaporator connectors.

5. Remove the evaporator.

6. Re-install the components by referring to the notes

– on pages 11-13. (See Fig. 16)

Figure 16

2.4.3 CAPILLARY TUBE

1.Remove the cabinet. (Refer to section 2.1.2)

2.After discharging the refrigerant completely – into a FreonTM Recovery System, unbraze the interconnecting tube at the capillary tube.

3.Remove the capillary tube.

4.Re-install the components by referring to the notes

– on page 11-13.

— 14—