To adjust temperature
4Use the Mode button to select either the Cool or MoneySaver® function
5COOLER – Touch the 
button to lower the room air temperature.
6WARMER – Touch the 
button to raise the room air temperature.
7Press both the 
and 
buttons at the same time to switch the temperature from Fahrenheit (°F) to Celsius (°C). Repeat Step 7 to switch from °C back to °F.
To adjust fan speed
8Touch the Fan Speed button to see the current setting. Touch it again to change speed. F1 is the lowest setting (SLEEP SETTING / LOW), F2 is MEDIUM, and F3 is HIGH.
To activate Smart Fan
9There is a fourth option, SF, when selecting the fan speed. This is the SMART FAN function. SMART FAN DOES NOT OPERATE IN CONJUNCTION WITH THE FAN ONLY MODE.
Smart Fan will adjust the fan speed automatically to maintain the desired comfort level. For example, if the outside doors in your home are opened for an extended period of time, or more people enter a room, Smart Fan may adjust to a higher fan speed to compensate for the increased heat load. This keeps you from having to adjust the fan speed on your own.
To set the hour clock
10Touch the Set Hour button to see the current setting. The number that is displayed is the approximate time (hour only).
Use the 
and 
buttons to change the settings. BE SURE TO SET A.M. AND P.M. ACCORDINGLY. (P.M. is indicated by a red light in the upper left corner of the display).
To set the timer
NOTE: Set the HOUR CLOCK (Set Hour) before attempting to set timer functions.
You can set the Start Time and Stop Time a minimum of one hour apart, and a maximum of 23 hours apart.
11After setting the time, press the Set Hour button once (Start
light on). Use the 
and 
buttons to select the time that the unit will START.
12After selecting the Start Time, press the Set Hour button once.
(Stop Light on). Use the 
and 
buttons to select the time that the unit will STOP. After selecting the stopping time, press the Set Hour button once.
13Press the Timer On/Off button (light turns on) to activate the timer function. To deactivate this function, press the Timer On/Off button once again (light turns off). Once the on and off times have been selected, they will remain in memory and cycle daily until changed.
NOTE: If the unit is unplugged or the power is interrupted, the HOUR must be reset or the Timer On/Off will not function when desired.
Automatic component protection
Your unit is equipped with Automatic Component Protection.
To protect the compressor of the unit, there is a three minute delay if you turn the unit off or if power is interrupted. The fan will not be affected. Also, if you switch from Cool mode to Fan Only mode, and switch back to Cool mode, there is a
5