Frigidaire 131921100 operating instructions Before Operating Your Dryer, Operating Steps

OPERATING INSTRUCTIONS

AUTOMATIC

TEMPERATURECYCLE SIGNALSTARTPERM PRESS / COLORS PRESS

SAVER

PERM PRESS	KNITS / DELICATES	LESS
		NORMAL DRY
MEDIUM HEAT	LOW HEAT	MORE
REGULAR	AIR FLUFF
HIGH HEAT	NO HEAT
		COOL DOWN

AUTOMATIC

MOREREGULAR NORMAL DRY

LESS

DAMP DRY

COOL DOWN

MORE

NORMAL DRY

20		LESS
	30	PRESS
	40
TIMED DRY		SAVER	AUTOMATIC
REGULAR	50 60		KNITS / DELICATES

Versión en español

Si desea obtener una copia en español de estas Instrucciones de Funcionamiento, sírvase escribir a la dirección que se incluye a continuación.

Solicite la P/N 131921200.

Spanish Owner's Guides

Frigidaire Home Products

P. O. Box 212378

Augusta, GA 30917

Before Operating Your Dryer

Read your dryer Owner's Guide. It has important safety and warranty information. It also has many suggestions for best drying results.

To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your dryer owner's guide before operating this appliance.

Operating Steps

Read Drying Procedures in your Owner's Guide.

It explains these operating steps in detail.

1. Prepare items for drying.

Printed in U.S.A.

2.Check that lint screen is clean and in place.

3.Load the dryer. If desired, add a dryer fabric softener sheet.

4.Close the dryer door.

5.Set Temperature and Cycle Signal (some models) controls.

6.Turn cycle selector clockwise to desired setting.

7.Start dryer. Push START button for 2 seconds or turn the START knob clockwise to ON, hold for 1- 2 seconds and release.

8.When the Cycle Signal control (some models) has been turned on, a signal will sound when the cycle ends.

9.Remove items immediately and hang or fold.

10.Clean lint screen after every load.

Temperature Selection

Always follow directions on fabric care labels.

To avoid fire hazard, do not use heat to dry items containing feathers or down, foam rubber,

plastics, or similarly textured, rubber-like materials. Use Air Fluff-No Heat setting only.

The REGULAR-HIGH HEAT, PERM PRESS-MEDIUM HEAT, and KNITS/DELICATES-LOW HEAT temp- erature settings may be used with any cycle setting. The AIR FLUFF-NO HEAT setting can be used only in the Timed Dry cycle.

AIR FLUFF-NO HEAT setting tumbles the load without heat. Use Air Fluff to freshen clothing, pillows or blankets, or to dust draperies.

Cycle Selection

Turn cycle selector clockwise to desired cycle and setting.

Each cycle ends with a cool down period. The heat automatically turns off and the load continues to tumble during the cool down period. This reduces wrinkling and makes items easier to handle during unloading.

Drying time varies depending on size and dampness of load, weight and fabric type. Room temperature and humidity, type of installation and electrical voltage or gas pressure can also affect drying time.

(continued, reverse side)

P/N 131921100 (9912)