Frigidaire 131921100 Energy Saving Tips, Automatic Delicate Cycle, Timed Dry Regular Cycle

AUTOMATIC

TEMPERATURE		CYCLE SIGNAL	START	PERM PRESS / COLORS	PRESS
					SAVER
PERM PRESS	KNITS / DELICATES			LESS
				NORMAL DRY
MEDIUM HEAT	LOW HEAT			MORE
REGULAR	AIR FLUFF
HIGH HEAT	NO HEAT

COOL DOWN

AUTOMATIC

MOREREGULAR NORMAL DRY

LESS

DAMP DRY COOL DOWN

MORE

NORMAL DRY

20		LESS
	30	PRESS
	40
TIMED DRY		SAVER	AUTOMATIC
REGULAR	50 60		KNITS / DELICATES

Cycle Selection (continued)

Automatic Regular Cycle

This cycle is best for cotton items that can be tumble dried. Drying time is determined automatically at the temperature selection of your choice.

•Initially set cycle selector on NORMAL DRY.

•For items requiring more drying time, set cycle selector on MORE/HEAVY.

•For items requiring less drying time, set cycle selector on LESS.

•Select DAMP DRY to remove some moisture from items to be line dried, dried flat, or ironed. (some models)

Automatic Delicate Cycle

This cycle is best for knit and delicate items. Drying time is determined automatically at the temperature selection of your choice.

•Low heat is suggested for knit and delicate items.

•Initially set cycle selector on NORMAL DRY.

•For items requiring more drying time, set cycle selector on MORE.

•For items requiring less drying time, set cycle selector on LESS.

•If the dried load cannot be removed promptly, the

cycle selector will advance to the Press Saver/ Fabric Sentry setting.

•Unheated tumbling continues during thePressSaver/ FabricSentry for 22 minutes to help reduce wrinkling.

•When the Cycle Signal (some models) is on, it will sound briefly every 5 minutes as a reminder to remove the load.

Timed Dry Regular Cycle

This cycle provides up to 60 minutes of drying time at the temperature selection of your choice.

Automatic Perm Press Cycle

This cycle is best for permanent press items. Drying time is determined automatically at the temperature selection of your choice.

•Medium heat is suggested for permanent press items.

•Initially set cycle selector on NORMAL DRY.

•For items requiring more drying time, set cycle selector on MORE.

•For items requiring less drying time, set cycle selector on LESS.

•If the dried load cannot be removed promptly, the cycle selector will advance to the Press Saver/ Fabric Sentry setting.

•Unheated tumbling continues during the PressSaver/ FabricSentry for 22 minutes to help reduce wrinkling.

•When the Cycle Signal (some models) is on, it will sound briefly every 5 minutes as a reminder to remove the load.

Energy Saving Tips

•Keep the lint screen clean and exhaust the dryer correctly.

•Sort laundry properly and select proper temperature and cycle settings. Choose an automatic dry cycle whenever possible for accurate drying time.

•Dry only full loads. Single items and small loads usually take longer to dry.

•Avoid overloading, adding wet items to a partially dry load, and overdrying.

•Dry one load after another to take advantage of a warm dryer.

•Opening the door needlessly causes warm air to escape, which prolongs drying time.

•If possible, use the dryer on low humidity days.

•Install the dryer in an area where the room temperature is at least 45°F (7°C).

P/N 131921100 (9912)