Common Washing Problems
Many washing problems involve poor soil and stain removal, residues of lint and scum, and fabric damage. For satisfactory washing results, follow these suggestions provided by The Soap and Detergent Association.
PROBLEM POSSIBLE CAUSES SOLUTIONS | PREVENTIVE MEASURES |
Blue stains •Undiluted liquid detergent or fabric softener dispensed directly onto fabric.
•If caused by detergent, mix 1 cup (240 ml) white vinegar with 1 quart (.95 L) water in a plastic container. Soak item 1 hour. Rinse.
•If caused by fabric softener, rub stains with bar soap. Wash.
•Avoid overfilling detergent and fabric softener compartments of dispenser.
Discoloration, •Not enough detergent.
graying•Wash water temperature too low. •Incorrect sorting.
Greasy, oily stains •Not enough detergent. •Undiluted liquid fabric softener
poured directly on fabric.
Holes, tears, or | •Incorrect use of chlorine bleach. | |
snags | •Unfastened | zippers, hooks, |
| buckles. |
|
| •Rips, tears and broken threads. | |
| •Overloading | the washer. |
| •Degradation of fabric. | |
Lint | •Incorrect sorting. | |
| •Tissues left | in pocket. |
| •Overloading | the washer. |
| •Not enough detergent. | |
| •Undissolved | detergent has left |
| a residue resembling lint. | |
| •Static cling is attracting lint. | |
| •Load washed too long. | |
•Rewash with correct amount of detergent and hottest water safe for fabric. Add bleach safe for fabric.
•Treat with prewash stain remover or liquid detergent.
•Increase detergent and water temperature. Rewash.
•Rub fabric softener stains with bar soap.
•May be irreversible if rips, tears and seams cannot be mended.
•Reduce load size. Rewash using correct water temperature, water level, and amount of detergent.
•Add nonprecipitating water conditioner to wash water to remove detergent residue.
•Add liquid fabric softener to final rinse. •Dry load in dryer.
•Remove lint with lint brush or roller.
•Sort items by soil level and color.
•Use correct amount of detergent, hottest water and bleach safe for fabric.
•Use correct amount of detergent and hottest water safe for fabric.
•Do not pour liquid fabric softener directly on fabric. See Washing Procedures for directions on adding softener.
•Never pour chlorine bleach directly on fabric.
•Check condition of items before washing. See Washing Procedures for preparing and loading the wash load and adding chlorine bleach.
•See Washing Procedures for sorting and preparing the wash load.
•Do not overload washer.
•Use correct temperature and amount of detergent, water and wash time.
ENGLISH
Pilling | •Pilling is normal with synthetic | ||
(Fibers break off, | and permanent | press fabrics. | |
ball up and cling to | This is due to abrasion from | ||
fabric.) | normal wear. |
| |
Residue or | •Undissolved | detergent. | |
powder on dark | • Some nonphosphate granular | ||
items; | detergents can combine with | ||
Stiff, harsh | hard water minerals to form a | ||
fabrics. | residue. |
|
|
| •Overloading | the | washer. |
Wrinkling | •Overloading | the | washer. |
| •Incorrect wash cycle for wash | ||
| load. |
|
|
• Use a lint brush or shaver to remove | •Use fabric softener in the washer to | |
pills. | lubricate fibers. |
|
| •When ironing, use spray starch or fabric | |
| finish on collars | and cuffs. |
| •Turn items inside out to reduce abrasion. | |
• Rewash load. | •Increase water temperature using hottest | |
| water safe for fabric. | |
| •Do not overload washer. | |
| •Use liquid detergent or use nonprecipitating | |
| water conditioner with nonphosphate | |
| granular detergent. | |
•Reduce load size. | •Do not overload washer. | |
•Rinse in cold water with liquid fabric | •Remove items from washer as soon as | |
softener using the Perm Press or Delicate | cycle is completed. | |
cycle. | •Use liquid fabric | softener. |
Yellow buildup of | •Agitation time too short. |
body soil on | •Wash water temperature too low. |
synthetic fabrics | •Not enough detergent. |
Yellow or brown •Iron or manganese in water
rust stains supply, water pipes, or water
heater.
•Soak in detergent booster or product | •Select correct wash cycle. |
containingenzymes. | •Use correct amount of detergent. |
•Wash in hot water (120°F/49°C) using full | •Wash synthetics frequently using hot or |
permanent press cycle. Increase | warm water. |
detergent. |
|
Add bleach safe for fabric. |
|
•Or,treatwithcolorremover. |
|
•Torestorediscoloredloadofwhites,use | •Use nonprecipitating water softener. |
rustremoversafeforfabric. | •Before washing, run hot water for a few |
•Do not use chlorine bleach to remove | minutes to clear lines. |
rust stains. It may intensify | •Drain water heater occasionally. |
discoloration. | •For an ongoing problem, install an iron filter |
| in your water supply system. |
9
