Cycle Selection

Turn cycle selector clockwise to desired cycle and setting.

Each cycle ends with a cool down period. The heat automatically turns off and the load continues to tumble for 5-10 minutes. This reduces wrinkling and makes items easier to handle during unloading.

Dryingtimevariesdependingonsizeanddampness of load, weight and fabric type. Room temperature and humidity, type of installation and electrical voltage or gas pressure can also affect drying time.

Automatic Colors Cycle

This cycle is best for permanent press, knit and delicate items. Drying time is determined automatically at the temperature selection of your choice.

Medium heat is suggested for permanent press items.

Low heat is suggested for knit and delicate items.

If the dried load cannot be removed promptly, the cycle selector will advance to the Press Saver setting. Unheated tumbling continues during Press Saver for 40 minutes to help reduce wrinkling.

The cycle signal will sound briefly every 5 minutes as a reminder to remove the load. If the load is removed before time has elapsed, turn the cycle selector knob to Off.

Note: Use the Automatic Whites cycle if you do not want to hear the cycle signal during Press Saver.

Automatic Whites Cycle

This cycle is best for cotton items that can be tumble dried.

Drying time is determined automatically at the temperature selection of your choice. This cycle is best for items of similar fabric, weight and construction.

For items requiring more drying time, set cycle selector on MORE DRY.

For items requiring less drying time, set cycle selector on LESS DRY.

Timed Dry Cycle

This cycle provides up to 70 minutes of drying time at the temperature selection of your choice.

Energy Saving Tips

Keep the lint screen clean and exhaust the dryer correctly.

Sort laundry properly and select proper temperature and cycle settings. Choose an automatic dry cycle whenever possible for accurate drying time.

Dry only full loads. Single items and small loads usually take longer to dry.

Avoid overloading, adding wet items to a partially dry load, and overdrying.

Dry one load after another to take advantage of a warm dryer.

Opening the door needlessly causes warm air to escape, which prolongs drying time.

If possible, use the dryer on low humidity days.

Install the dryer in an area where the room temperature is at least 45°F (7°C).

Laundry Center Features

CONVENIENCE

 

HANGER

 

DRYING

 

RACK

 

SAFETY

 

DOOR

 

SWITCH

 

LINT

 

FILTER

 

OPENING

 

 

MODEL-SERIAL

 

NUMBER PLATE

BLEACH

 

DISPENSER

 

 

SAFETY LID

 

LOCK

DYNAMIC

FABRIC

SOFTENER

BALANCE

DISPENSER

SYSTEM

 

SELF-CLEANING

LINT

FILTER

 

P/N 134818800 (0611)

Page 2
Image 2
Frigidaire 134818800 (0610) operating instructions Cycle Selection, Energy Saving Tips, Laundry Center Features