Avoid Service Checklist

Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not the result of defective workman-ship or materials in this appliance.

OCCURRENCE	SOLUTION

Air conditioner will not operate.	Wall plug disconnected. Push plug firmly into wall outlet.
	Wall plug disconnected. Push plug firmly into wall outlet.
	Plug Current Device Tripped. Press the RESET button.
	House fuse blown or circuit breaker tripped. Replace fuse with time delay type or reset circuit breaker.
	Control is OFF. Turn Control ON and set to desired setting.

Air from unit does not feel cold enough.

Room temperature below 60°F (16°C). Cooling may not occur until room temperature rises above 60°F (16°C).

Temperature sensing element touching cold coil, located behind air filter. Straighten away from coil.

Reset to a Lower temperature.

Compressor shut-off by changing modes. Wait approximately 3 minutes and listen for compressor to restart when set in the COOL mode.

Air conditioner cooling, but room is too warm - ice forming on cooling coil behind decorative front.

Outdoor temperature below 60°F (18°C). To defrost the coil, set FAN ONLY Mode.

Air filter may be dirty. Clean filter. Refer to Care and Cleaning section. To defrost, set to FAN ONLY Mode.

Temperature is set too Low for night-time cooling. To defrost the coil, set to FAN ONLY Mode. Then, set Tem- perature to a Higher setting.

Air conditioner cooling, but room is too warm - NO ice forming on cooling coil behind decorative front.

Dirty air filter - air restricted. Clean air filter. Refer to Care and Cleaning section.

Temperature is set too High. Set temperature to a Lower setting.

Air directional louvers positioned improperly. Position louvers for better air distribution.

Front of unit is blocked by drapes, blinds, furniture, etc. - restricts air distribution. Clear blockage in front of unit.

Doors, windows, registers, etc. open - cold air escapes. Close doors, windows, registers, etc.

Unit recently turned on in hot room. Allow additional time to remove “stored heat” from walls, ceiling, floor and furniture.

Air conditioner turns on and off rapidly.

Dirty air filter - air restricted. Clean air filter.

Outside temperature extremely hot. Set FAN speed to a faster setting to bring air past cooling coils more frequently.

Noise when unit is cooling.

Air movement sound. This is normal. If too loud, set to a slower FAN setting.

Window vibration - poor installation. Refer to installation instructions or check with installer.

Water dripping INSIDE when unit is cooling.

Improper installation. Tilt air conditioner slightly to the outside to allow water drainage. Refer to installation instructions - check with installer.

Water dripping OUTSIDE when unit is cooling.

Unit removing large quantity of moisture from humid room. This is normal during excessively humid days.

	Remote Sensing Deactivating	• Remote control not located within range. Place remote control within 20 feet & 180°, radius of the front of the
	Prematurely (Some Models).
	Prematurely (Some Models).	unit.
		• Remote control signal obstructed. Remove obstruction.

	Room Too Cold.	• Set temperature too low. Increase set temperature.
		• Set temperature too low. Increase set temperature.

SZ000400(En)-Yaokong

12/10/2004, 5:36 PM

220202D019 specifications

The Frigidaire 220202D019 is a highly efficient and powerful appliance that showcases modern technology and thoughtful design, making it a reliable addition to any kitchen. With a robust structure and user-friendly features, this model is designed to enhance both functionality and convenience for the user.

One of the standout features of the Frigidaire 220202D019 is its efficient cooling system. The appliance is engineered to maintain optimal temperature levels, ensuring that food stays fresher for longer periods. It utilizes advanced cooling technologies that help to distribute cold air evenly throughout the unit. This means that regardless of where items are placed inside, they will maintain the same quality and freshness.

The design of the Frigidaire 220202D019 focuses on maximizing storage space. It comes with a variety of shelves and compartments, including adjustable shelving, which provides flexibility for stacking different-sized items. The inclusion of deep-door bins is a thoughtful addition, as it allows for easy access to frequently-used items like condiments and beverages.

Another notable characteristic of this model is its energy efficiency. The Frigidaire 220202D019 is equipped with Energy Star certification, which means it adheres to strict guidelines set by the Environmental Protection Agency for energy consumption. This not only reduces the environmental impact but also translates to savings on electricity bills, making it a smart investment for budget-conscious consumers.

The appliance features modern technologies such as smart diagnostics, which enable users to troubleshoot issues quickly and efficiently. This connectivity allows for easy maintenance and can alert users to performance issues before they escalate into more significant problems. Additionally, the intuitive controls are designed for ease of use, allowing anyone in the household to operate the appliance without hassle.

In terms of aesthetics, the Frigidaire 220202D019 boasts a sleek and stylish design that can complement any kitchen decor. Available in various finishes, it enhances the overall look of the kitchen while providing practical solutions for food storage.

In summary, the Frigidaire 220202D019 is a blend of innovative features, energy-efficient technology, and thoughtful design. Its superior cooling performance, ample storage options, and user-friendly characteristics make it a top choice for those seeking a reliable and efficient kitchen appliance.

Frigidaire 220202D019 manual Avoid Service Checklist, Occurrence Solution

Models: 220202D019