Frigidaire 220202D019 manual Timer Delay Stop / Start Feature

Air Conditioner Features

(continued)

TIMER: DELAY STOP / START

FEATURE

DO THIS:

PRESS

TIMER BUTTON

YOU WILL SEE: TIMER SETTING

LIGHT On

Note: For Delay Stop, the unit must be in the On position.

Note: For Delay Start, the unit must be in the Off position.

To adjust timer setting, tap or hold the UP arrow(^) or the DOWN arrow(V) to change delay timer at .5 hour increments, up to 10 hours, then at 1 hour increments up to 24 hours. The control will count down the time remaining until start (8, 7.5, 7, etc.). The Delay Start mode automatically selects cooling with maximum Fan Speed. The temperature maintained will be the same as previously set. To change the set temperature, press “COOL” then Up or Down arrows until the desired temperature is indicated on the display. After 5 seconds, the control will automatically change the display back to the hours remaining until the unit will start/stop. Turning the unit “ON” or “OFF” at any time will cancel the Delay Start/Stop function.

SLEEP FEATURE:

DO THIS:

PRESS SLEEP

BUTTON

YOU WILL SEE:

LIGHT On

Note: In this “MODE” the selected temperature will increase by 2 degrees F 30 minutes after the mode is selected. The temperature will then increase by another 2 degrees F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected temperature. This ends the “Sleep” MODE and the unit will continue to operate as originally programmed. The “Sleep” MODE program can be cancelled at any time during operation by again pressing the “Sleep” button.

8

SZ000400(En)-Yaokong 8 12/10/2004, 5:36 PM