Frigidaire 241540100 (1203) manual

10Connecting The Water Supply

To connect the water supply to the rear of your refrigerator:

1Ensure that the refrigerator is not plugged in.

2Flush the supply line until water is clear by placing the end of the copper tube in a sink or bucket and opening the shut-off valve.

NOTE

3Unscrew the plastic cap from the water valve inlet at the rear of your refrigerator. Discard the cap.

4Slide the brass compression nut, then the ferrule (sleeve) onto copper tube.

5Push the copper tube into water valve inlet as far as it will go (1/4 inch).

6Slide the ferrule (sleeve) into valve and finger-tighten the compression nut onto valve. Tighten another half turn with a wrench. Do not over-tighten.

7Secure the copper tube to your refrigerator’s rear panel with a steel clamp and screw (see illustration).

8Coil the excess copper tubing (about 2½ turns) behind your refrigerator as shown. Arrange coiled tubing to avoid vibration or wear against other surfaces.

9Open water supply shut-off valve and tighten any connections that leak.

After connecting the water supply, see page 22 for information about priming an empty water supply system. Also read all topics in the “Automatic Ice & Water Dispenser” section to learn about normal operating procedures.

241540100_eb_sxs_Use&Care_En.pmd

10

1/22/2004, 10:33 AM

Image 10

Frigidaire 241540100 (1203) manual To connect the water supply to the rear of your refrigerator

Contents

Use & Care Guide Please Read and Save this Guide Finding InformationMake a Record for Quick Reference Table of Contents General Safety SafetyImportant Safety Instructions Child Safety Electrical Information Required Tools Removing The DoorsGetting Through Narrow Spaces To prepare for removing the doors To remove the top hinge cover To remove the refrigerator door To remove the freezer door About Your REFRIGERATOR’S Water Supply Connecting The Water SupplyWhat you will need To connect the water supply to the rear of your refrigerator Feature Overview Understanding Features and Terms Setting Cooling Temperatures Controls & SettingsAllowing Cooling Time Before USE What To Do If The Temperature Displays Flash Making Temperature AdjustmentsChoosing Fahrenheit or Centigrade SYSTEM-MONITORING Alarms Responding to Alarms Audible Tones & Indicator Lights Using The Alarm Reset Button Turning the Cooling System on and OFF Cantilever Shelves Storage FeaturesShelf Features To change the position of a shelf Crisper Humidity Control DrawersCrispers Meat Keeper Doors Storage Bins Accessories Dispensing Ice Using the DispenserAutomatic Ice & Water Dispenser Dispensing Water Using the Dispenser Control Panel Express Ice Button Priming the Water Supply System To prime the water supply system ICE Dispenser Operation & Care Using The Ice Dispenser After InstallationTurning The Ice Dispenser On And Off Cleaning The Ice Dispenser Ice Dispenser Tips To clean the ice dispenser Remove and empty the ice storage bin if Locating the Water Filter Ordering Replacement FiltersChanging The Filter Water Filter Location Replacing the Water Filter More About Your Advanced Water Filter To replace your pure advantageTM water filter Storing Food & Saving Energy Ideas for Storing Foods Ideas for Saving Energy InstallationTemperature Settings Loading the Freezer Normal Operating Sounds & Sights Understanding the Sounds YOU MAY Hear Care & Cleaning Protecting Your Investment Care & Cleaning Tips Vacation & Moving Tips Replacing Light Bulbs To replace light bulbs Warranty Information Consumer Solutions To Common Problems Before YOU Call Temperatures Are Too Cold Water/Moisture/Frost Outside Refrigerator Ice Dispenser Odors In Refrigerator