Grill Assembly
IMPORTANT: Remove all protective plastic film from stainless steel parts prior to assembly/use. This film is installed at the factory to prevent damage that could occur during shipment and handling.
LEFT SHELF ASSEMBLY
1.Open the grill hood and place a piece of styrofoam from the packaging under the grill hood to prop the grill hood open slightly. (See Fig. 1)
2.Attach the left shelf by inserting the four shelf hooks into the slots on the side of the grill. (See Fig. 1)
3.After inserting the four shelf hooks, press the shelf against the grill and press downward until the shelf locks in place. Make sure the top strip is hanging all the way inside of the grill before pressing downward.
(See Fig. 1)
4.Install one self tapping screw into the bottom front hole of the shelf to lock shelf in place. (See Fig. 2)
SIDE BURNER PARTS ASSEMBLY
1.Remove side burner assembly from packaging. (See Fig. 3)
2.Place a piece of styrofoam from the packaging in the grill to leave the grill hood propped open slightly. (See Fig. 4)
3.Attach the right side burner by inserting the four shelf hooks into the slots on the side of the grill. (See Fig. 4)
4.After inserting the four shelf hooks, press the side burn- er shelf against the grill and press downward until the shelf locks in place. Make sure the top strip is hanging all the way inside of the grill before pressing downward. (See Fig. 4)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
3
