Setting the Clock and Minute Timer
(some models)
:Flashing indicates Minute Timer mode
Your model may be equipped with the clock shown below. Follow the instructions to set the clock and minute timer on your range. Not all manual clean ranges are equipped with a clock.
To Set the Clock
When the range is first plugged in, or when the power supply to the range has been interrupted, "12:00" will flash in the display window.
1.Push 
.
2.Push in and hold
or
until the correct time appears in the
display.
Advances time,
reverses time.
To Set the Minute Timer
1.Push 
, "0:00" will appear in the display window. The timer can be set for any amount of time from 00:01 minute to 12:00 hours.
2.Push in and hold
until the correct amount of time appears in the
display.
Advances time,
reverses time. The minute timer will automatically start when the button is released. The “:” will flash to indicate Minute Timer mode.
3.When the set time has passed, the control will display "0:00" and beep three
times. The timer will continue to beep until
is pressed.
4.Push
to cancel the timer and return to the clock mode.
7
