Care & Cleaning
Surface
Burner
Grate
1st
Cleaning the Burner Grates, Burner Caps, Burner Heads
The Burner Grates, Burner Caps, and Burner Heads should be routinely cleaned. Keeping the burner ports clean will prevent improper ignition and an uneven flame at each burner position. Refer to the following instructions:
To Remove and Replace the Surface Burner Grate, Surface Burner Cap and Surface Burner Head - Remove in the following order; (1st) Surface Burner Grate, (2nd) Surface Burner Cap, (3rd) Surface Burner Head (See Figure 1).
Figure 1
Surface | Reverse the procedure above to replace the Surface Burner Cap, Surface Burner | |
Burner | Head and Surface Burner Grate. Do not remove any burner parts from the | |
2nd Cap | cooktop until the burner parts have completely cooled and are safe to handle. | |
| ||
| Do not operate the surface burners without the Surface Burner Caps, Surface | |
Sur- | Burner Heads and Surface Burner Grates properly in place. | |
| ||
face |
| |
3rd Burner | To Clean the Burner Caps, Burner Heads and Grates - Use a | |
Head | pad or a mild abrasive cleanser to clean the surface burner caps and surface burner | |
Electrode | heads. The Grates and the outer vent covers are designed to be Dishwasher safe | |
for cleaning. The ports (or slots) around the burner heads must be routinely cleaned. | ||
Orifice | ||
If residue still remains in these ports, use a | ||
holder | ||
slots or holes. For proper flow of gas and ignition of the | ||
| ||
| SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER MATERIAL TO ENTER | |
| THE GAS ORIFICE HOLDER OPENING. ALWAYS keep the surface burner cap | |
| and surface burner head in place whenever a surface burner is in use. |
Surface Burner | Surface Burner | Surface Burner | Outer Vent |
Grate | Caps | Heads | Covers |
THE COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop.
THE INNER VENT IS NOT REMOVABLE. Do not attempt to remove the inner vent cover.
Use caution when replacing the burner cap so the electrode is not damaged. This may cause a delayed ignition or prevent the burner from igniting.
Any additions, changes or conversions required in order for this appliance to perform satisfactorily must be made by authorized servicer.
19