Setting OVEN controls - Model B

Self-cleaning

To Start the Self-Clean Cycle

*We recommend a 2 hour self-clean cycle for light soils, and a 3 hour cycle for average to heavy soils (to assure satisfactory results).

To Set the Controls for a Self-Clean Cycle:

1.Be sure the clock shows the correct time of day.

2.Push the CLEAN pad. "- - -" appears in the display.

3.Push the UP ARROW pad until "3:00" appears in the display for a 3 hour cycle, or push the DOWN ARROW pad until "2:00" appears in the display for a 2 hour cycle.

4.As soon as the UP or DOWN ARROW pad is released,

"CLn" appears in the display.

5.As soon as the controls are set, the motor driven lock will begin to close automatically and the "Door

Locked" indicator light will flash. DO NOT open the door while the light is flashing (it takes about 15 seconds for the lock to close).

6.The "Door Locked" light will glow until the cleaning cycle is completed or cancelled, and the oven temperature has cooled.

When the Self-Clean Cycle is Completed:

1.The time of day will appear in the display window and the "Door Locked" light will continue to glow.

2.Once the oven has cooled down for about 1 hour and the "Door Locked" light has gone out, the oven door can be opened.

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self- cleaning cycle due to excessive smoke or fire:

1.Push the CLEAR OFF pad.

2.Once the oven has cooled down for about 1 hour and the "Door Locked" light has gone out, the oven door can be opened.

3.Correct the condition which caused the smoking.

4.Restart the self-clean cycle once all conditions have been corrected.

CAUTION

Use care when opening the oven door after self-clean- ing cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution when opening the door after the self-cleaning cycle is com- pleted. The oven may still be VERY HOT.

Failure Modes

All failure modes give a visual and audible alarm. When display shows F10 (temperature runaway), F30 (oven sensor circuit fault) or F90 (motor door lock fault), the electronic oven control has detected a fault condition. Note that code and push the CLEAR OFF pad to clean the display and stop the beeping. Reprogram the oven. If fault recurs, push CLEAR OFF pad, disconnect the appliance to prevent damage and contact an authorized servicer.

16

Page 15 Page 17
Page 16
Image 16
Frigidaire 318200964 To Start the Self-Clean Cycle, To Set the Controls for a Self-Clean Cycle
Page 15 Page 17

318200964 specifications

The Frigidaire 318200964 is a high-quality replacement part designed for a range of Frigidaire cooking appliances. Recognized for its reliability and efficiency, this component is essential in ensuring that your oven functions smoothly. The 318200964 is primarily known as a range surface burner control knob, which plays a critical role in regulating the flame intensity of the burners.

One of the main features of the Frigidaire 318200964 is its impressive compatibility. This part is not only designed for Frigidaire models but also fits various brands within the same appliance category. This versatility makes it an ideal choice for those looking to replace an old or malfunctioning burner control knob without the hassle of replacing the entire stovetop unit.

Durability is another characteristic that sets the 318200964 apart from other replacement parts. Constructed from high-quality materials, it is specifically designed to withstand the heat and demands of everyday cooking. This sturdy design helps maximize the lifespan of the product, ensuring that it can handle both casual cooking and more intense culinary endeavors.

In terms of operation, the Frigidaire 318200964 features easy-grip styling, which allows for precise control over burner settings. The intuitive design ensures that users can easily adjust the flame, helping to achieve the perfect cooking temperature for a variety of dishes. Whether you are simmering sauces, boiling pasta, or searing meats, this control knob provides an excellent user experience.

Technologically, the 318200964 is designed to be straightforward in its installation process. Homeowners can replace their malfunctioning knob with minimal tools, often requiring just a simple screwdriver. The straightforward design not only saves time but also allows for easy upkeep of your cooking appliance.

In conclusion, the Frigidaire 318200964 burner control knob combines compatibility, durability, ease of use, and simple installation. It is an essential component for anyone looking to maintain the functionality of their Frigidaire range or similar appliances, ensuring that culinary creativity can flourish without interruption. This replacement part makes everyday cooking a breeze, allowing home chefs to focus on creating delicious meals rather than worrying about appliance performance.
Top Page Image Contents