Frigidaire FGGC3665KB Before setting surface controls, Locations of the Gas Surface Burners

before setting surface controls

Locations of the Gas Surface Burners

The SIMMER burner is best used for simmering delicate sauces, etc. This burner is located at the right rear burner position.

The STANDARD sized burners are used for most surface cooking needs. This burner is located at the left rear positions on the 30" & 36" cooktop (and there is one more standard burner located at the right front position on the 36" cooktop models).

The POWER burner is best used for bringing large quantities of liquid rapidly up to temperature or when preparing larger quantities of food. Those burners are located at the right and left front positions on the 30" cooktop (and there is another power burner located at the center position on the 36" cooktop).

Assembly of the Surface Burner Burner Caps and Burner Grates

It is very important to make sure that all of the Surface Burner Caps and Surface Burner Grates are installed correctly and at the correct locations.

1Remove all packing material from cooktop area.

2Discard all packing material (if applicable).

3Unpack Burner Grates and position on the cooktop (see Figure 3 or 4).

REMEMBER — DO NOT ALLOW SPILLS, FOOD,

CLEANING AGENTS OR ANY OTHER MATERIAL TO ENTER THE GAS ORIFICE HOLDER OPENING. Always keep the Burner Caps and Burner Heads in place whenever the surface burners are in use.

Figure 1 - 30" Model	Figure 3 - 30" Model
(your model may not look exactly like this one)

Figure 2 - 36" Model

(your model may not look exactly like this one)

Figure 4 - 36" Model

6