Frigidaire 318205300 important safety instructions Setting Continuous Bake or 6 Hour Energy Saving

Setting Continuous Bake or 6 Hour Energy Saving

The TIMER and SELF CLEAN pads control the Continuous Bake or 6 Hour Energy Saving features. The oven control has a factory preset built-in 6 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 6 hours. The oven can be programmed to override this feature for Continuous Baking.

To set the control for Continuous Bake or 6 Hour

Energy Saving features

1.Press and hold TIMER for 6 seconds.

After 6 seconds “6Hr OFF” or “StAY On” will appear in the display and the control will beep once.

2.Press SELF CLEAN to switch between the 6 Hour Energy Saving and continuous bake features.

Note: “6Hr OFF” in the display indicates the control is set for the 6 Hour Energy Saving mode and “StAY On” indicates the control is set for the Continuous Bake feature.

3.Press START to accept the change (display will return to time of day) or press CANCEL to reject the change.

Setting Temperature Display — Fahrenheit or Celsius:

The BROIL and SELF CLEAN pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.

To change display from Fahrenheit to Celsius or Celsius to Fahrenheit

1.To tell if the display is set for Fahrenheit or Celsius press BROIL and hold it for 6 seconds; “550°” will appear and “BROIL” will flash in the display and a beep will sound. If “FAhrnht” appears, the display is set to show temperatures in Fahrenheit. If “CELSIUS” appears, the display is set to show temperatures in Celsius.

2.Press SELF CLEAN to switch between Fahrenheit or Celsius display modes. The display will show either “FAhrnht” or “CELSIUS”.

3.Press START to accept the change or press CANCEL to reject the change.

Setting OVEN controls

Setting Silent Control Operation

The DELAY START and SELF CLEAN pads control the Silent Control operation feature. The Silent Control operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

To change control from normal sound operation to silent control operation

1.To tell if your range is set for normal or silent operation press and hold DELAY START. “----” will appear and “DELAY” will flash in the display. After 6 seconds “bEEP On” or “bEEP OFF” will appear in the display.

2.Press SELF CLEAN to switch between normal sound operation and silent operation mode. The display will show either “bEEP On” or “bEEP OFF”.

Note: If “bEEP On” appears, the control will operate with normal sounds and beeps. If “bEEP OFF” appears, the control is in the silent operation mode.

3.Press START to accept the change or press CANCEL to reject the change.

Note: The control will always beep at the end of a minute timer and will beep when a set temperature has been reached, even if the control is set to silent operation.

25