Auto track setting[Camera height]
Select the height that the camera is installed to from the following.
2.5m(8.5ft)/2.75m(9.0ft)/3.0m(10.0ft)/3.25m(11.0ft)/3.5m(11.5ft)/3.75m(12.5ft)/4.0m(13.5ft)/4.25m(14.0ft)/
4.5m(15.0ft)/4.75m(16.0ft)/5.0m(16.5ft)/5.5m(18.5ft)/6.0m(20.0ft)/6.5m(21.5ft)/7.0m(23.5ft)/7.5m(25.0ft)/
8.0m(26.5ft)/8.5m(28.5ft)/9.0m(30.0ft)/9.5m(31.5ft)/10.0m(33.5ft)/12.0m(40.0ft)/14.0m(46.5ft)/16.0m(53.5ft)/
18.0m(60.0ft)/20.0m(66.5ft)/22.0m(73.5ft)/24.0m(80.0ft)/26.0m(86.5ft)/28.0m(93.5ft)/30.0m(100.0ft)
Default: 2.5m(8.5ft)
The camera height setting is the tracking target’s and camera’s height (H1: 2.5m(8.5ft)-30.0m(100.0ft)), not
H2.
Camera
H1
Within 2.5m(8.5ft) to
30.0m(100.0ft)
Tracking
target
H2
IMPORTANT
•Enter the height for the camera height setting accurately. The detection and tracking capabilities are
greatly reduced if the height setting is incorrect.
[Auto track alarm]
Select an alarm to be used when auto tracking from the following.
Off: An alarm is not outputted.
On(Immediate): Alarms are continuously outputted during auto tracking. (Outputs are made at 5 second
intervals.)
On(After alarm wait time): Alarms are outputted only once when the auto tracking is continuously performed
for a set period.
On(In preset alarm area): While tacking, if the tracking target enters the set alarm area, an alarm is outputted
once. Refer to page 124 for information about alarm areas.
Default: Off
[Alarm wait time]
Select a setting time from the following when auto track alarm is set to “On(After alarm wait time)”.
1s/10s/30s/1min/3min/5min
Default: 10s
[Auto track data in video stream]
From the following selections select whether or not to add auto track in the video stream.
Off: Auto track data is not added to images.
On: Auto track data is added to images, but an outline of the tracking target is not displayed on the “Live” page.
On with track video display: Auto track data is added to images and an outline of the tracking target is
displayed on the “Live” page.
Default: Off
122 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]