Panasonic WV-SC380, WV-ST160, WV-SW170, WV-SW390 Destination of notification

Note

•When “On” is selected, notification of the alarm occurrence will be provided to the registered destination

addresses in order (to IP address 1 first, to IP address 8 last).

[Additional alarm area data(VMD/Auto track)]

SW396

SC386

Determine whether or not to send notifications for alarm area numbers of VMD alarm and alarm area numbers

of auto track alarm with the Panasonic alarm protocol by selecting On/Off.

•Default: Off

[Additional alarm area data(VMD)]

SW395

SC385

SC384

Determine whether or not to send notifications for alarm area numbers of VMD alarm with the Panasonic alarm

protocol by selecting On/Off.

•Default: Off

[Destination port]

Select a destination port for the Panasonic alarm protocol from the following.

•Available range: 1 - 65535

•Default: 1818

The following port numbers are unavailable since they are already in use.

20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670

[Retry times]

Select a retry time for the Panasonic alarm protocol.

•Available range: 0-30

•Default: 2

Destination of notification

[Address 1] - [Address 8]

Enter the destination IP address or host name of the Panasonic alarm protocol from the following. Up to 8

destination addresses can be registered.

•[Alarm] checkbox: When the checkbox is selected, the Panasonic alarm notification will be provided upon

an alarm occurrence.

•[Destination address]: Enter the destination address or host name.

–Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and

the hyphen (-).

To delete the registered destination address, click the [Delete] button respective to the desired destination

address.

SW396

SW395

SC386

SC385

SC384

SW175

SW172

ST165

ST162

•[Diag.] checkbox: When the checkbox is selected, notification using Panasonic alarm protocol will be

provided in the following cases.

–When notification of the remaining capacity of the SD memory card has been provided

–When the SD memory card has become full

–When the SD memory card cannot be recognized

SW174W

•[Diag.] checkbox: When the checkbox is selected, notification using Panasonic alarm protocol will be

provided.

[Auto track cooperation]

SW396

SC386

Select whether to perform Auto track cooperation setup.

When “Auto track cooperation” is set to “On”, alarm notification is only implemented when the number of the

“Alarm area” set in auto track alarm conforms with the alarm area number. Alarm notifications other than auto

150 Operating Instructions

13 Configure the alarm settings [Alarm]