Panasonic WV-SW390, WV-SW170, WV-ST160, WV-SC380 Password Retype password, Access level, User check

15 Configure the settings relating to the authentication [User mng.]

Note

•When the [Authentication] setting has been changed, close the web browser, and then access the camera again.

•For other devices such as other i-PRO series cameras or network disk recorders, unless otherwise stated, Digest authentication is not supported. (As of August 2011)

[User name]

Enter a user name.

•Available number of characters: 1 - 32 characters

•Unavailable characters: " & : ; \

•Default: None (blank)

[Password] [Retype password]

Enter a password.

•Available number of characters: 4 - 32 characters

•Unavailable characters: " &

•Default: None (blank)

Note

•When the user name already in use is entered and the [Set] button is clicked, the respective user information will be overwritten.

[Access level]

Select the access level of the user from the following.

•1. Administrator: Allowed all available operations of the camera.

•2. Camera control: Allowed to display images from the camera and to control the camera. The camera setting configuration is unavailable.

•3. Live only: Only displaying live images is available. The camera setting configuration and camera control are unavailable.

•Default: 3. Live only

[User check]

From the pull-down menu of “User check”, the registered user can be selected and the selected user’s information can be checked.

The registered user will be displayed with the access level. (Example: admin [1])

To delete the registered user, click the [Delete] button after selecting the user to be deleted.

15.2Configure the settings relating to the host authentication [Host auth.]

Click the [Host auth.] tab on the “User mng.” page. (→page 47, page 49)

Operating Instructions

157