16 Configure the settings of the servers[Server]The settings relating to the mail server, the FTP server and the NTP server can be configured on this page.
The “Server” page has 3 tabs; the [Mail] tab, the [FTP] tab and the [NTP] tab.
16.1 Configure the settings relating to the mail server
[Mail]
Click the [Mail] tab on the “Server” page. (®page 47, page 49)
The settings relating to the mail server used to send the alarm mail can be configured on this page.
IMPORTANT
•When a terminal that receives e-mails is not compatible with UTF-8 encode, it is impossible to receive
alarm mails correctly.
[SMTP server address]
Enter the IP address or the host name of the SMTP server used to send e-mails.
•Available number of characters: 1 - 128 characters
•Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
[SMTP port]
Enter the port number to which e-mails are sent.
•Available port number: 1-65535
•Default: 25
The following port numbers are unavailable since they are already in use.
20, 21, 23, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
[POP server address]
When “POP before SMTP” is selected for “Type”, enter the IP address or the host name of the POP server.
•Available number of characters: 1 - 128 characters
•Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
Operating Instructions 161
16 Configure the settings of the servers [Server]