About extra optical zoom/extra zoom
Among approx. 1.3 megapixel image capture area of the MOS image sensor, the central part of approx. 0.31
megapixels is extracted for shooting. That enables the shooting with a higher zooming effect. When the image
capture size at “VGA” is applied, the zoom factor can be adjusted up to 36x
SW395
SW395
SC385
SC385
SC384
SC384
/72x
SW396
SW396
SC386
SC386
/2x
SW175
SW175
SW174W
SW174W
SW172
SW172
ST165
ST165
ST162
ST162
.
[Digital zoom]
Select the digital zoom setting from the following.
•On (Max X16)
SW175
SW175
SW174W
SW174W
SW172
SW172
ST165
ST165
ST162
ST162
: Images can be zoomed in on with the extra
zoom (1x - 2x) and the electronic zoom (higher zoom factors, up to 16x).
•On (Max X288)
SC384
SC384
: Images can be zoomed in on with the optical zoom (1x - 18x), extra optical zoom
(up to 36x) and the electronic zoom (higher zoom factors, up to 288x).
•On (Max X432)
SW395
SW395
SC385
SC385
: Images can be zoomed in on with the optical zoom (1x - 18x), extra
optical zoom (up to 36x) and the electronic zoom (higher zoom factors, up to 432x).
•On (Max X864)
SW396
SW396
SC386
SC386
: Images can be zoomed in on with the optical zoom (1x - 36x), extra
optical zoom (up to 72x) and the electronic zoom (higher zoom factors, up to 864x).
•Off: Does not use the digital zoom.
•Default: Off
Note
SW175
SW175
SW174W
SW174W
SW172
SW172
ST165
ST165
ST162
ST162
:
•When “On (Max X16)” is selected, digital zooming will stop when the zoom factor has reached 2x.
•When the zoom factor is 2x or more, the setting of the preset positions will become unavailable.
SC384
SC384
:
•When “On (Max X288)” is selected, digital zooming will stop when the zoom factor has reached 36x.
•When the zoom factor is 36x or more, the setting of the preset positions will become unavailable.
SW395
SW395
SC385
SC385
:
•When “On (Max X432)” is selected, digital zooming will stop when the zoom factor has reached 36x.
•When the zoom factor is 36x or more, the setting of the preset positions will become unavailable.
SW396
SW396
SC386
SC386
:
•When “On (Max X864)” is selected, digital zooming will stop when the zoom factor has reached 72x.
•When the zoom factor is 72x or more, the setting of the preset positions will become unavailable.
[Pan-Tilt degree/Zoom ratio display]
SW395
SW395
SC385
SC385
SC384
SC384
SW175
SW175
SW174W
SW174W
SW172
SW172
ST165
ST165
ST162
ST162
Select “On” or “Off” to determine whether or not to display the current panning/tilting degree and the zoom ratio
display on images when the camera is being operated manually.
•On: Displays the current panning/tilting degree and the zoom ratio display.
•Off: Does not display the current panning/tilting degree and the zoom ratio display.
•Default: On
Note
•When “On” is selected, the panning/tilting degree and the zoom factor will be displayed at the position
selected for “OSD position” on the [Basic] tab of the “Basic” page. (®page 55)
[Camera position display]
SW396
SW396
SC386
SC386
When operating the camera manually, you can select what information to display in the image from the
following.
•Off: Information is not displayed in the image.
•Pan-Tilt degree/Zoom ratio display: The Pan-Tilt degree/Zoom ratio display is displayed.
•Direction display: Direction display is displayed.
•Default: Pan-Tilt degree/Zoom ratio display
96 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]