The settings relating to Panasonic alarm protocol can be configured in this section.
Panasonic alarm protocol notification[Panasonic alarm protocol]
Select “On” or “Off” to determine whether or not to provide notification by Panasonic alarm protocol according
to the settings for the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.
–When an alarm is detected (“Alarm”)
SW396
SW396
SW395
SW395
SC386
SC386
SC385
SC385
SC384
SC384
SW175
SW175
SW172
SW172
ST165
ST165
ST162
ST162
:
–When a notification of the remaining capacity of the SD memory card has been provided (“Diag.”)
–When the SD memory card has become full (“Diag.”)
–When the SD memory card cannot be recognized (“Diag.”)
•Default: Off
Operating Instructions 149
13 Configure the alarm settings [Alarm]