10 Configure the basic settings of the camera [Basic]
[Alarm status update mode]
Select an interval of the camera status notification from the following.
When the status of the camera changes, the alarm occurrence indication button, the [AUX] button or the SD saving status indicator*1 will be displayed to notify of the camera status.
•Polling(30s): Updates the status each 30 seconds and provide notification of the camera status.
•Real time: Provide notification of the camera status when the status has changed.
•Default: Real time
Note
•Depending on the network environment, notification may not be provided in real time.
[Alarm status reception port]
When selecting “Real time” for “Alarm status update mode”, designate a port number to which the status change notification is to be sent.
•Available port number: 1 - 65535
•Default: 31004
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
[Automatic installation of viewer software]
Determine whether or not to install the viewer software from this camera.
•On: Installs the viewer software from the camera automatically.
•Off: The viewer software cannot be installed from the camera.
•Default: On
IMPORTANT
•It is impossible to display images and to receive/transmit audio between the camera and the PC when the viewer software “Network Camera View 4S” is not installed on the PC.
•The number of the viewer software installations can be checked on the [Upgrade] tab of the “Maintenance” page.
[Language]
Select the language to initially display when the camera is accessed from the following. English/Japanese/Italian/French/German/Spanish/Chinese/Russian
•Default: English
The language displayed on the “Live” page can also be changed. (→page 12)
*1 | SW396 | SW395 | SC386 | SC385 | SC384 | SW175 | SW172 | ST165 | ST162 |
|
Operating Instructions
57
