11 Configure the settings relating to images and audio [Image/Audio]
Note
•When the preset position is set to shoot the following objects, it is recommended to select “Off”, and adjust the focus before registering the preset positions.
An object whose contrast is low
An object whose depth never changes
An object with high luminance such as a spotlight
[Dwell time] | SW396 | SW395 | SC386 | SC385 | SC384 |
Select a dwell time (duration the camera stops for at each preset position) for the preset sequence operation. 5s/ 10s/ 20s/ 30s
•Default: 10s
[Super Dynamic] | SW396 | SW395 | SC386 | SC385 |
Select “On” or “Off” to determine whether to turn on or off the Super Dynamic function. This function can be applied to each preset position.
•On: The Super Dynamic function will work.
•Off: The Super Dynamic function will not work.
•Default: Off
[Wide dynamic range] | SC384 | SW175 | SW174W | SW172 | ST165 | ST162 |
Select “On” or “Off” to determine whether or not to activate the wide dynamic range. This function can be applied to each preset position.
•On: The wide dynamic function will work.
•Off: The wide dynamic function will not work.
•Default: Off
[Back light compensation (BLC)]
Select “On” or “Off” to determine whether or not to activate the back light compensation (BLC) function. When
“On” is selected for “Super Dynamic” (Wide dynamic range | SC384 | SW175 | SW174W | SW172 | ST165 |
|
|
|
|
|
ST162 ), this setting is unavailable. The back light compensation function can compensate back light by setting mask areas on brighter parts of images brighter.
•On: Mask areas will be set automatically.
•Off: Mask areas will not be set automatically. It is necessary to set them manually.
•Default: Off
[Mask area]
When “Off” is selected for “Super Dynamic” (Wide dynamic range | SC384 | SW175 | SW174W | SW172 | ||||
ST165 | ST162 | ) and “Back light compensation (BLC)”, it is possible to compensate for backlight by masking | ||||||
brighter areas. |
|
|
|
|
|
|
| |
Refer to page 111 for descriptions of how to mask. |
|
|
|
|
|
| ||
[Zoom] buttons, [Focus] buttons SW396 | SW395 | SC386 | SC385 | SC384 | , [Brightness] | |||
buttons, Control pad/buttons |
|
|
|
|
|
| ||
Refer to page 12 for descriptions of how to operate these buttons/pad.
[Set] button
Registers the preset positions.
[Delete] button
Deletes the preset position specified by the position number.
[Close] button
Click this button to close the “Preset position” setup menu.
116
