Panasonic WV-SC380, WV-ST160, WV-SW170, WV-SW390 , , [Terminal 3], , , [VMD alarm], [Auto track alarm] , , [Command alarm], [Originating port number],

–Open

SW175

SW174W

SW172

ST165

ST162

: An alarm is detected when the terminal status

is changed to “Off”.

•Alarm output: Alarm output will be carried out according to the settings for “Alarm output terminal

setup” (®page 141).

•Default: Off

[Terminal 3]

Determine how to use terminal 3.

•Off: Not used.

•Alarm input: Receives alarms.

–Close

SW175

SW174W

SW172

ST165

ST162

: An alarm is detected when the terminal status

is changed to “On”.

–Open

SW175

SW174W

SW172

ST165

ST162

: An alarm is detected when the terminal status

is changed to “Off”.

•AUX output: AUX output will be supplied. The [AUX] buttons will be displayed on the “Live” page.

•Default: Off

Note

•AUX is a camera terminal that allows users to operate (Open/Close) arbitrarily from the “Live” page.

For example, an operator can remotely control lights in a place where the camera is installed by

connecting the terminal to the light controller.

•Refer to the installation guide for further information about input/output rating of each terminal.

SW396

SW395

SC386

SC385

SC384

•While “Alarm input” is being selected, an alarm is detected when the terminal status is changed to

“On”. (Default)

It is possible to configure the setting so that an alarm is detected when the terminal status is changed

to “Off”. Refer to the [Readme] file on the provided CD-ROM for further information about the setting.

Or refer to our website (http://panasonic.net/pss/security/support/info.html) for further information

about the supported software.

[VMD alarm]

When clicking “VMD >>”, the [VMD area] tab of the “Alarm” page will be displayed. (®page 143)

[Auto track alarm]

SW396

SC386

When clicking “Auto track setting >>”, the [Image/Position] tab of the “Camera” page will be displayed. The

setup menu will be displayed in a newly opened window. (®page 120)

[Command alarm]

Select “On” or “Off” to determine whether or not to receive the command alarm.

The command alarm is the function that provides notification of a Panasonic protocol alarm from the other

cameras. When “On” is selected, alarm actions will be performed between multiple cameras.

•Default: Off

[Originating port number]

Select a port number to be used to receive the command alarm.

•Available range: 1-65535

•Default: 8181

The following port numbers are unavailable since they are already in use.

20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 554, 995, 10669, 10670, 59000-61000

Operating Instructions 135

13 Configure the alarm settings [Alarm]