Panasonic WV-SC380, WV-ST160, WV-SW170, WV-SW390 11.6.7 Configure the settings relating to auto track (Auto track setup menu) (SW396/SC386)

Note
•The following are the camera operations that can be learned.
–Start position operations
pan/tilt/zoom/focus position/brightness
–Camera operations
pan/tilt/zoom/focus position/brightness/moving the preset position
•The auto focus function cannot be used when performing patrol operations. As a characteristic of zoom
lenses, when images are zoomed up from the “Wide” side, they may become blurred. When learning
zoom operations, starting from the “Tele” side will reduce blurring.
•The operational range of patrol is from horizontal to directly underneath the camera. Digital flip function
cannot be used.
[Zoom] buttons, [Focus] buttons, [Brightness] buttons, Control pad/buttons and [Go] button
Refer to page 12 for descriptions of how to operate these buttons/pad.
[Close] button
Click this button to close the “Patrol” setup menu.
11.6.7 Configure the settings relating to auto track (“Auto track”
setup menu) (SW396/SC386)
Click the [Setup>>] button of “Auto track” on the [Image/Position] tab of the “Image/Audio” page (®page 98).
120 Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]