Frigidaire 100, 400 Changing Color Panels, Step, Cut Hazard, Spacer, To change the color panel

Models: 100 400

1 20
Download 20 pages 14.37 Kb
Page 15
Image 15
 Changing Color Panels

STEP 1 Changing Color Panels

STEP 1

Cut Hazard Color

Panel(s)

STEP 2  Spacer Bottom

Trim

Cut Hazard

Metal door panels are sharp and should be handled with care. Wear gloves to protect hands.

Failure to do so can result in injury.

Some models come with reversible door panel inserts.

STEP 2 To change the color panel: Spacer

To change the color panel:

Side

Trim

STEP 3

STEP 4

Color Panel(s)

STEP 3Customized Wood Panels Control Panel

Color Panel(s)

Bottom

Trim

1.Remove snap-on bottom trim by pulling forward. Support color panel(s) at bottom while removing trim. Slide color panel(s) downward 1/2”.

2.Grasp top and bottom of panel(s) and bow slightly until they are clear of trim. DO NOT REMOVE SPACER.

3.Arrange panel(s) so desired color is facing out. Place one side of panel under side trim and bow slightly until other side fits under opposite trim. Slide panel(s) up to fit under control panel.

4.Replace bottom trim by fitting slot over bottom edge of door and press to secure.

Customized Wood Panels

Your dishwasher can be customized with 1/4” wood panels. Refer to your installation instructions for more information.

Bottom Edge of Door

13

Page 15
Image 15
Frigidaire 100 Changing Color Panels, Cut Hazard, Spacer, To change the color panel, Step Step, Customized Wood Panels