Operating Instructions (continued)
Wash Cycle Selections
Note: Cycle times are approximate and will vary with options selected. Not all cycles available on all models.
Cycle Chart
Cycle | Description | To Select Cycle | Water | Time* | Washes/ | |
|
|
| (approx.) | (approx.) | Rinses | |
Pots & | For pots, pans, | • Turn dial to POTS & PANS/HEAVY | 7.2 | gal. | 82 min. | 2 washes |
Pans | casseroles, and | WASH. | 6.0 | imp. gal. |
| 4 rinses |
| dinnerware with dried- | • Select | 27.3 | liters |
|
|
| on or | • Select other desired OPTIONS. |
|
|
|
|
|
|
|
|
|
|
|
Heavy | For heavily soiled | • Turn dial to POTS & PANS/HEAVY | 7.2 | gal. | 82 min. | 2 washes |
Wash | dishes and silverware. | WASH. | 6.0 | imp. gal. |
| 4 rinses |
|
| • Select desired OPTIONS. | 27.3 | liters |
|
|
|
|
|
|
|
|
|
Normal | For regularly soiled | • Turn dial to NORMAL WASH. | 6.0 | gal. | 76 min. | 2 washes |
Wash | dishes and silverware. | • Select desired OPTIONS. | 5.0 | imp. gal. |
| 3 rinses |
|
|
| 22.7 | liters |
|
|
Light | For lightly soiled or | • Turn dial to LIGHT WASH. | 4.8 | gal. | 69 min. | 1 wash |
Wash | • Select desired OPTIONS. | 4.0 | imp. gal. |
| 3 rinses | |
| silverware. |
| 18.2 | liters |
|
|
Rinse/ | For rinsing dishes that | • DO NOT USE detergent. | 1.2 | gal. | 1 rinse | |
Hold | will be washed later. | • Turn dial to RINSE/HOLD. | 1.0 | imp. gal. |
|
|
|
| (Models with SANITIZE option, select | 4.5 | liters |
|
|
|
| SANITIZE OFF and HEAT DRY OFF.) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| * Includes dry time. |
Energy Options
Hi-Temp Wash Option
When
RINSE/HOLD.
To turn off option, select
Sanitize Option (available select models)
To sanitize your dishes and glassware, select the SANITIZE ON option. The water temperature in the final rinse will be raised to 155°F (68°C) and will maintain that temperature for 9 minutes. This option is available in Pots & Pans, Heavy, Normal and Light cycles. The cycle time will be extended until the proper water temperature is reached.
Washing action will continue during the water heating delay. For best results, the incoming water temperature should be at least 120°F(49°C).
The sanitize criteria may not be satisfied if there is an interruption of the cycle, power failure, or if the incoming water temperature is below 120°F(49°C).
Hi-Temp Rinse Option (available select models)
When
To turn off option, select
5