Frigidaire 800 Operating Instructions continued, Options Selections, Hi-Temp Wash, No Heat Dry

Models: 800

1 16
Download 16 pages 63.65 Kb
Page 5
Image 5
 Operating Instructions (continued)

Cycle Chart Operating Instructions (continued)

Cycle Chart

Cycle

To Select

Water

Time*

Washes/

 

 

Cycle

(approx.)

(min.)

Rinses

 

 

 

 

 

 

 

 

Pots Pans

 

 

 

 

 

 

For pots, pans, casseroles

Select POTS PANS and desired

8.5

gal.

105

2 washes

 

and dinnerware with

OPTIONS. HI-TEMP WASH and

7.1

imp. gal.

 

5 rinses

 

dried-on or baked-on soils.

SANITIZE will automatically be

32.2

liters

 

 

 

 

provided.

 

 

 

 

 

 

 

 

 

 

 

 

Normal Wash

Select NORMAL WASH and desired

6.1

gal.

85

2 washes

 

For regularly soiled

 

dishes and silverware.

OPTIONS.

5.1

imp. gal.

 

3 rinses

 

 

 

23.1

liters

 

 

 

Light Wash (Both Racks)

 

4.9

gal.

75

1 wash

 

For lightly soiled and

Select LIGHT WASH (BOTH RACKS)

 

pre-rinsed dishes and

and desired OPTIONS.

4.1

imp. gal.

 

3 rinses

 

silverware.

 

18.5

liters

 

 

 

Light Wash (Upper Rack)

 

3.7

gal.

65

1 wash

 

For lightly soiled and

Select LIGHT WASH (UPPER RACK)

 

pre-rinsed dishes and

and desired OPTIONS.

3.1

imp. gal.

 

2 rinses

 

silverware when you

 

14.0

liters

 

 

 

do not have a full load.

 

 

 

 

 

 

 

 

 

 

 

 

 

* Includes dry time.

 

 

 

 

 

 

Options Selections

Hi-Temp Wash

When HI-TEMP WASH option is selected, the dishwasher heats water in the main wash to approximately 140°F (60°C). This increase in water temperature helps dishwasher detergent remove food grease and soil from dishes more effectively and aids in drying. HI-TEMP WASH option can be used with all cycles.

When HI-TEMP WASH option is selected, the light above the pad will come on and remain on until end of cycle. To turn off the HI-TEMP WASH option, press the pad a second time. The light above the pad will turn off.

The cycle time will be extended until the proper water temperature is reached. Washing action will continue during the water heating delay. For best results, the incoming water temperature should be at least 120°F (49°C).

The sanitize criteria may not be satisfied if there is an interruption of the cycle, power failure, or if the incoming water temperature is below 120°F (49°C).

To turn off the SANITIZE option, press the pad a second time. The light above the pad will turn off.

Sanitize Option

To sanitize your dishes and glassware, select the SANITIZE option. When selected, the light above the pad will come on and remain on until end of cycle. The water temperature in the final rinse will be raised to 150°F (66°C) and will maintain that temperature for 9 minutes. This option is available in Pots Pans, Normal and Light (Both Racks) cycles.

No Heat Dry

NO HEAT DRY option saves electricity since the heating element is off during drying portion of cycle. When selected, the light above the pad will come on and remain on until end of cycle. To speed the drying process, open the door slightly after the cycle is complete. Some water droplets may remain on door and tub and in areas where dishes touch silverware basket and rack.

5

Page 5
Image 5
Frigidaire 800 warranty Operating Instructions continued, Options Selections, Hi-Temp Wash, Sanitize Option, No Heat Dry