Air Conditioner Features
(continued)
TO TURN UNIT ON:
Temp/Timer
AUTO
FanFan
SlowerFaster
DO THIS:
PRESS ON/
OFF PAD
NOTE: The following instructions represent the Control Panel, the same instructions can be used for the Remote Control.
YOU WILL SEE:
Temp/Timer
AUTO
Fan | Fan |
Slower | Faster |
TO CHANGE TEMPERATURE
SETTING:
Temp/Timer
AUTO
FanFan
SlowerFaster
DO THIS:
PRESS TO
RAISE
PRESS TO
LOWER
YOU WILL SEE:
Temp/Timer
AUTO
Fan | Fan |
Slower | Faster |
NOTE: Tap or hold either up( ) or down ( ) button until the desired temperature is seen on the display. This temperature will be automatically maintained anywhere between 60 F(15 ) and 90 F(32 ). If you want the display to read the actual room temperature. See “ To Operate on Fan Only” section on Page 7.
TO ADJUST FAN SPEEDS:
Temp/Timer
AUTO
FanFan
SlowerFaster
DO THIS:
PRESS TO
SELECT:
FASTER
SLOWER
YOU WILL SEE:
Temp/Timer
AUTO
FanFan
SlowerFaster
A 2 Digit Display is used to indicate the Fan Speed setting, from
10through 99. When the “ SLOW” button is pressed, the motor speed will slow down at multiple intervals (90 distinct settings),
to a minimum setting of 10. To speed the motor up, press the
“FASTER” button. The speed will increase at multiple intervals to a maximum setting of 99. After 5 seconds the control will automatically change back to displaying the set temperature.
6