Before SETTING SURFACE CONTROLS
Element ON (all models)
Your appliance is equipped with two different types of radiant surface control indicator lights that will glow on the backguard- the Element On indicator light and the hot surface indicator lights.
The element ON indicator lights are located on the control panel (Figure 1) between the two radiant element control knob and will glow when a surface element is turned ON.
element ON indicator light
Figure 1
Element ON indicator light location.
Hot surface indicator light
(Model C only)
The hot surface indicator light located on the cooktop (Figure 2) will glow when any surface cooking area heats up and will remain on until the glass cooktop has cooled to a MODERATE level.
hot surface indicator light
Figure 2 - Model C only
Hot surface indicator light location.
NOTE
The “Hot Surface” indicator lights will glow when the element is turned on and will continue to glow after the control knob is turned to the "OFF" position. It will glow until the heating surface area has cooled sufficiently. The glass surface may still be hot and burns may occur if the glass surface is touched before the indicator light has turned OFF. The message may remain on even though the controls are turned OFF.
12
