Frigidaire FFED3015LW manual Setting Oven Controls Model a, Control pad features, To Set the Clock

SETTING OVEN CONTROLS - MODEL A

Control pad features

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become

familiar with the various features and functions of the oven as described below. Detailed instructions for each feature and function follow later in this Use & Care Guide.

1				7
2	3	4	5	6

1.Bake pad—Use to select the bake cooking feature.

2.Broil pad—Use to select the broil cooking feature.

3.Timer on-offpad—Use to set or cancel the Timer. The Timer does not start or stop cooking.

4.Clock pad—Use to set the time of day.

5.Clear off pad—Use to cancel any oven feature previously entered except the time of day and minute timer.

6.Down arrow pad—Used along with the function pads to select oven temperature, time of day and minute timer.

7.Up arrow pad—Used along with the function pads to select oven temperature, time of day and minute timer.

To Set the Clock

When the appliance is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".

1.Press CLOCK pad.

2.Within 4 seconds, press and hold the UP or DOWN ARROW pad until the correct time of day appears in the display.

To Change the Temperature Display Mode

The electronic oven control temperature display mode was factory preset to display (Fahrenheit) °F oven temperatures. Note: Oven cooking temperatures may be set from 170°F to 500°F (76°C to 260°C).

To change the Temperature Display Mode to °C (Celsius) or from °C to °F (do not use Bake or Broil while changing the Temperature Display Mode):

1.Press & hold the BROIL pad for 7 seconds until F or C appears in the display. Note: At this time the display will show the current Temperature Display Mode whether set for F or C.

2.Within 4 seconds, press the UP or DOWN ARROW pad once to toggle between the °F (Fahrenheit) and °C (Celsius).

3.To accept the change, wait 5 more seconds until the oven control beeps once. To complete the change skip step 4 below, OR;

4.If at any time during the process of changing the Temperature Display Mode (F or C) you decide the change is not desired, press the CLEAR OFF pad before the oven control beeps once to cancel the process.

5.The display will then return to the time of day with any temperature display mode change you may have requested.

To Set the Minute Timer

1.Press TIMER ON/OFF pad.

2.Press the UP ARROW pad to increase the time in one minute increments. Press and hold the UP ARROW pad to increase the time faster. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.

Note: If you press the DOWN ARROW pad first, the timer will advance to 11 hours and 59 minutes.

3.The display shows the timer count down in minutes until one minute remains. Then the display will count down in seconds.

4.When the set time has run out, the timer will sound a 3 seconds beep. 0:00 will appear in the display until TIMER ON/OFF pad is pressed.

Note: While the minute timer is counting down, the

":" will flash. The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any other function, the minute timer will be shown in the display. To view other functions, press the pad for that function.

To Change the Minute Timer while it is in use: While the timer is active and shows in the display, press and hold the UP or DOWN ARROW pad to increase or decrease the time.

To Cancel the Minute Timer before the set time has run out: Press TIMER ON/OFF.

15