Frigidaire FFEW2725LW Adjusting The Oven Temperature, Self-Clean Cycle, Self-Cleaning,  Note

Self-Clean Cycle

 NOTE

The kitchen area should be well ventilated using an open window, ventilation fan or exhaust hood during the Self-Clean cycle. This will help eliminate the normal odors associated with the Self-cleaning cycles.

To Set the Controls for a Self-Clean (3 hours) or a Delayed Start Self-Clean (3 hours):

 NOTE

If you do not want to start a Delayed Self-Clean Cycle, skips steps 2 & 3.

1.Be sure the clock shows the correct time of day.

2.Press the START TIME pad.

3.Press and hold the UP ARROW pad to scroll to the time to start the delayed Self-Clean cycle. Release the pad when the desired time is displayed.

4.Press the CLEAN pad. "- -" appears in the display.

5.Press the UP ARROW pad once.

As soon as the controls are set, the motor driven lock will begin to close automatically and the “Door

Locked” indicator light will flash. DO NOT open the oven door while the light is flashing (it takes about

15 seconds for the oven door to lock).

SELF-CLEANING

6."CLn" will appear in the display during the Self-Clean cycle and the "Door Locked" light will glow until the Self-Cleaning cycle is complete or cancelled and the oven temperature has cooled.

When the Self-Clean Cycle is Completed:

1.“CLn” will appear in the display and "Door Locked" light will continue to glow.

2.Once the oven has cooled down for about 1 HOUR and the "Door Locked" light has gone out, the oven door can be opened.

 NOTE

When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.

Stopping or Interrupting a Self-Cleaning Cycle If it becomes necessary to stop or interrupt a Self- Cleaning cycle:

1.Press the CLEAR/OFF pad.

2.Once the oven has cooled down for about 1 HOUR and the "Door Lock" light has gone out, the oven door can be opened.

3.Restart the Self-Clean cycle once all conditions have been corrected.

ADJUSTING THE OVEN TEMPERATURE

Your oven thermostat has been precisely set at the factory. This setting may differ from your previous oven, however, so your recipe times may not give you the results you expect. If you think that the oven is cooking too hot or cool for your recipe times, you can adjust the thermostat so that the oven cooks hotter or cooler than the temperature displayed.

To Adjust Oven Temperature:

1.Press and hold the BAKE pad for 8 seconds. The display now indicates the amount of degrees offset between the original factory temperature setting and the current temperature setting. If the oven control has the original factory calibration, the display will read “0”.

2.The temperature can now be adjusted up or down 35°F or 19°C, in 1°F or 1°C steps by pushing and holding the UP or DOWN ARROW pad. Adjust until the desired amount of degrees offset appears in the display. When lowering the oven temperature, a minus sign (-) will appear before the number to indicate that the oven will be cooler by the displayed amount of degrees.

3.When you have made the desired adjustment, wait 5 seconds or press CLEAR/OFF to accept the change.

 NOTE

The oven temperature adjustments made with this feature will not change the Self-Clean cycle temperature.

15