Frigidaire FFFS5115PA Select the appropriate cycle and settings for the load, Start the washer

Models: FFFS5115PW

1 26
Download 26 pages 22.35 Kb
Page 9
Image 9
6Select the appropriate cycle and settings for the load.

OPERATING INSTRUCTIONS

Operating Your Washer, continued

6Select the appropriate cycle and settings for the load.

Turn the cycle selector knob in either direction to select the cycle desired. The indicator for that cycle will be illuminated.

The estimated cycle time, suitable wash and rinse water temperatures, final spin speed, soil level, and options for each cycle will be indicated for the cycle selected. See the “Washer Settings Chart” for more details.

To change the settings, press the temp, spin speed and soil level buttons to scroll to the desired settings.

To select or delete an option, press the button for that option. The indicator will be illuminated when the option has been selected. The indicator will no longer be lighted when the option has been deleted.

To change the cycle once the cycle has begun, press cancel, select a new cycle, and press START again. Just turning the cycle selector knob will not change the cycle.

To stop the cycle, press cancel.

7Start the washer. NOTE

If the cycle is interrupted during spin, it will take approximately 2-3 minutes for the door lock to release. DO NOT force open the door.

A signal will sound at the end of the cycle if the chime option has been selected.

Remove items from the washer when the cycle ends and place in dryer, line dry or dry flat as directed on the fabric care label.

Manual background NOTE

To provide the best care for your laundry, not every setting or option is available with every cycle. If a setting or option is not available for the cycle selected, the indicator will not light.

Adjustments to a cycle will be remembered and re- called each time that cycle is selected in the future.

To return to factory settings, press these two buttons at the same time and hold until the signal sounds.

7Start the washer.

Close the door and press START. The washer will not operate with the door open. DOOR OPENwill be displayed as a reminder to close the door.

Select delay start to delay the beginning of the cycle, if desired.

As a safety measure, the door will automatically lock during the entire wash cycle.

To add a forgotten item to the washer any time during the wash portion of the cycle, press pause. When the door unlocks, open the door, add the item, close the door and press START to resume the cycle

If changes to the settings or options are attempted after the cycle starts, you will hear several beeps when the buttons are pressed. To change the settings or options, press pause, make the new selections and press START again.

For best results

Follow the fabric care label instructions on items to be dried.

Excess wrinkling, color transfer or odors may develop in items left in the washer after the cycle has ended, if not removed promptly.

Manual backgroundManual backgroundCAUTION

ENTRAPMENT and TIP-OVER HAZARD Do not leave the door open if there are small children or pets present. An open door could entice children to hang on the door or crawl inside the washer. If there are no small children present, you may leave the door ajar to prevent odor build up.

9

Page 9
Image 9
Frigidaire FFFS5115PA Select the appropriate cycle and settings for the load, Start the washer, Operating Instructions