Installation

Door Opening

NOTE

The refrigerator doors are designed to shut by themselves within a 20 degree opening.

Your refrigerator should be positioned to allow easy access to a counter or table when removing food. For best use of drawers and freezer baskets, the refrigerator should be in a position where both the refrigerator and freezer doors can be fully opened.

Guidelines for final positioning of your refrigerator:

•All four corners of the cabinet must rest firmly on the floor.

•The cabinet should be level at the front and rear.

•The sides should tilt ¼ inch (6 mm) from front to back (to ensure that doors close and seal properly).

•Doors should align with each other and be level.

All of these conditions can be met by raising or lowering the adjustable front rollers.

To level the cabinet using the front rollers:

1Open both doors and remove the toe grille (see “Toe Grille Installation and Removal” in the “Installation” section).

2Close the doors and use a flat-blade screwdriver or

3/8 inch socket wrench to raise or lower the front rollers.

3Ensure both doors are bind-free with their seals touching the cabinet on all four sides.

To level the doors using the adjustable lower hinge:

NOTE

Some models will not have a set screw. For those models follow steps 2 through 4.

1Before leveling either door, remove set screw that locks door height into position. (The door cannot be adjusted without set screw removed).

2If the refrigerator door is lower than the freezer door, raise the refrigerator door by turning the adjustment screw clockwise using a 7/16 inch wrench. (See illustration.)

3If the freezer door is lower than the refrigerator door, raise the freezer door by turning the adjustment screw clockwise using a 7/16 inch wrench. (See illustration.)

4After leveling, verify door stop contacts lower hinge and top of door does not contact upper hinge through full movement of door (from fully closed to fully open).

5Reinstall set screw, locking the door height.

 

 

Open Door

7/16” Wrench

 

 

and 3/32” Hex Key

Door Stop

 

(some models)

 

Flange

Hinge

 

 

 

 

 

Flange

 

 

Set Screw

 

 

(some models)

 

 

Hinge

6Replace the toe grille by fitting it into place

(see “Toe Grille Installation and Removal” in the “Installation” section).

6

Page 5 Page 7
Page 6
Image 6
Frigidaire FFUS2613LE, FFUS2613LM, FFUS2613LP manual Door Opening, Guidelines for final positioning of your refrigerator
Page 5 Page 7

FFHS2322MM, FFHS2322MQ, FFUS2613LP, FFUS2613LE, FFUS2613LM specifications

The Frigidaire FFUS2613LP, FFUS2613LM, FFHS2322MM, FFHS2322MQ, and FFUS2613LE are standout appliances in the realm of refrigerators, packed with features and technologies designed to enhance user experience and convenience.

Starting with the FFUS2613LP and FFUS2613LM, these models feature a sleek, side-by-side design that not only maximizes storage space but also offers easy access to both refrigerated and frozen items. The adjustable shelves allow for personalized organization, accommodating various sizes of containers and ensuring efficient use of space. These units utilize advanced cooling technologies, including a cooling system that maintains a consistent temperature, thereby preserving the freshness of food for longer periods.

Both models come equipped with an exterior ice and water dispenser, providing easy access to icy cold water and fresh ice without having to open the fridge door. This feature helps minimize temperature fluctuations, further contributing to energy efficiency. Additionally, their energy-efficient design is compliant with ENERGY STAR standards, making them environmentally friendly options that help reduce electricity bills.

The FFHS2322MM and FFHS2322MQ models also offer impressive features, such as a spacious interior layout and additional storage options like door bins and humidity-controlled crisper drawers. These crisper drawers are particularly notable for their ability to maintain optimal humidity levels for fruits and vegetables, helping to extend their freshness.

The FFHS2322 series also integrates advanced filtration technology that ensures water and ice are not only cold but also free from impurities. The easy-to-replace water filter makes maintaining clean water simple and hassle-free. Both models emphasize user-friendly controls, allowing for straightforward adjustments to temperature settings and filter changes.

Finally, the FFUS2613LE is renowned for its unique fingerprint-resistant finish, which helps keep the surface looking clean and polished without the need for constant wiping. This model also showcases similar features to its counterparts, such as energy-efficient cooling and versatile shelving.

In conclusion, Frigidaire combines innovative technology with practical design in the FFUS2613LP, FFUS2613LM, FFHS2322MM, FFHS2322MQ, and FFUS2613LE refrigerators. Their advanced features, including customizable storage, water filtration, and energy efficiency, make them ideal appliances for any modern kitchen, catering to the needs of diverse households while prioritizing sustainability and convenience.
Top Page Image Contents