DISHWASHER FEATURES
Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms against soiled surfaces. Next, the dishwasher fills with water covering the filter area. Water is then pumped through the spray arms onto the dishware. Soil particles go down the drain as the water is pumped out and replaced with clean water. The number of water fills will vary with the cycle being used. Features may vary by Model.
Nozzle and Upper Spray Arm Top Rack
Tub Gasket
Cup Shelves
BowlTines | Serial Label |
| |
| (located on right |
MiddleSprayArm | side of tub) |
| |
| Silverware |
| Basket |
Glass Trap | Bottom Rack |
| |
| Blade SprayTM |
Overfill Protector
Heating Element
Detergent Dispenser
Rinse Aid
Dispenser
Vent
Getting Started
1.Load dishwasher
2.Add detergent
3.Add rinse aid
4.Select desired CYCLE. The indicator light above the pad will glow when selected.
5.Select desired OPTIONS. The indicator light above the pad will glow when selected.
6.Run hot water faucet nearest dishwasher until water is hot. Turn water off.
7.To start, press START/CANCEL pad.
8.Close door to latch.
NOTE
To customize your dishwasher to match your cabinets
•You will need a trim kit.
•See Step 10 of Installation Instructions that came with dishwasher for more information.
4
